Open the adjustment wheel of the 3-way valve as far as it will go
anti-clockwise.
Using a screwdriver, remove the adjustment wheel gently and place
it in a new position, so that the number 6 points towards the trian-
gular marking
Set the valve to the desired position.
Check the supply temperature with a thermometer.
Change the EPP bracket of the return flow pipe from left to right.
NOTICE!
If the compact control station is rotated by 180°, you must
place the opening for the mixer (approx. 53 mm) on the left-
hand side. In addition, remove the inserted insulating shell
for the return flow pipe from the left-hand side out of the
insulating box and re-insert it on the right-hand side.
NOTICE!
In the case of the compact control station model 1252.1 our
settings are valid as opposed to the manufacturer's infor-
mation. Manufacturer's documentation should be observed
regarding maintenance and repairing faults.
3.2
Assembly
3.2.1
Wall mounting
Fig. 3: Specified spaces for wall mounting
How to mount the compact
control station to the wall:
Handling
Compact control station preset value
10 from 11
