NEVER USE FABRIC SHAVER TO SHAVE SKIN, AS IT MAY CAUSE INJURY.
TAKE CAUTION WHEN USING FABRIC SHAVER, AS IT CONTAINS SHARP CUTTING BLADES.
WHEN YOU REMOVE/LOOSEN THE PROTECTOR COVER OF THE CUTTING BLADES, THE FABRIC SHAVER
WILL SHUT OFF AUTOMATICALLY. SHAVER IS EQUIPPED WITH AN AUTOMATIC SAFETY LEVER.
1. Fabric shaver is not suitable for all fabrics and materials. Avoid using the device on soft fabrics or
fabrics with textured design.
2. Shaver is designed for the removal of balls and thread ends from garment and home furnishings
only. We hereby disclaim all liabilities or consequential damages if shaver is issued for any other
purposes.
3. Before using the fabric shaver, test on a hidden area of the fabric to be shaved.
4. When shaving, place garments on a flat and stable surface. Always tug away raised loops inside the
garment and avoid using fabric shaver on corners and edges of garments.
5. To shave, slide the ON/OFF switch to the “ON” position. Move the head of the unit lightly over the
fabric to remove fuzz, pills (nubby fabric clusters caused by friction) and pulled threads. Slide to
“OFF” when completed.
6. Empty the storage bin after every use, or when the storage bin is half full. To remove storage bin
press firmly on the sides and slide the bin down. After emptying, replace the storage bin. When the
bin “clicks” it is positioned properly.
Protective Cover
On/Off Switch
AC Adaptor
Battery Cover
Storage Bin
Over time, the shaver performance may be affected. To regain performance, maintenance may be
achieved by cleaning the cutting blades. To clean the blades, please carefully follow these instructions:
1. Be sure the ON/OFF switch is in the “OFF” position. Remove the battery and /or adaptor from the unit.
2. Remove the protective cap by turning it counterclockwise.
3. Remove the cutting blade/fan assembly by gently pulling it out. WARNING: Extreme care should be
taken when handling the sharp blades.
4. Clean the cutting blades with a soft brush removing any build up from the cutting edges.
5. Reassemble the unit in the reverse order of the above steps.
For best performance, add a thin coating of light oil or silicone spray to a lint free cloth. Then gently
pass the cloth over the inner surface of the foil (which is the side that does not touch the fabric). For
safe removal of the protective cover, see Maintenance instructions above. Do not lubricate the side
that touches the fabric.
INSTRUCTIONS GUIDE
Model no: 430215
Congratulations on your purchase of the Vie Art
fabric shaver. The handle positions provides a
comfortable and efficient use and it can be used
with the included 110 volt adapter or with 4
regular or rechargeable C batteries not included.
Your clothes, upholstery and throws will look like
new again.
Please read all instructions prior to use.
WARNING
SAFETY
HOW TO USE
PARTS OF FABRIC SHAVER
BATTERY INSTALLATION
TO OPERATE WITH ADAPTOR
MAINTENANCE
1
2
3
4
5
6
7
8
IMPORTANT
1. This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instructions concerning use of the appliance by a person responsible for their safety;
2. Children should be supervised to ensure that they do not play with the appliance.
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection
facilities. Contact your local government for information regarding the collection systems
available. When replacing old appliances with new ones, the retailer is legally obligated to
take back your old appliance for disposals at least free of charge.
Fabric shaver uses “C” size batteries (not included). To install batteries:
1. Remove the storage by pressing firmly on the sides and sliding the bin down.
2. Remove the battery cover by pressing the lock tab on the side of the cover.
3. Insert the batteries as shown on the battery cover (+ and - must be in the proper position for the
unit to operate) and replace the battery cover onto the unit.
FIRST REMOVER THE BATTERIES, then insert adaptor cord into the shaver and plug into any
110/120-volt household outlet. Once you are done using fabric shaver, remove adaptor cord and store
in a cool, dry place.
Inner surface of foil.
Apply oil or silicone
as instructed above
.
Outer Rim
Inner Threads
