V-Tap VoIP Manual EN v2.7 Oct 2018 © 2017-2018 Vidicode 19
Tunnel Bro ARP Filter
This filter sees that not too much packets are taken from the local
connected network.
Many LAN’s at the office have a lot of overhead
with packets that are not relevant for recording VoIP calls.
Therefore, all Broadcast and ARP packets are standard discarded,
reducing the size of the stored Tunnel data.
Tunnel Send Start/Stop Time
Sending data via the Tunnel can be scheduled into timeframe. If lots
of data is received by the V-Tap and therefor also lots of data must
be send to the Tunnel server, it might be useful to delay the sending
to save bandwidth on the network. Sending data is done only
between the given start and stop times. The entered format can be
“
HH / HH
” or “
HH:MM / HH:MM
”. Example:
“
22:30 / 08:15
”
, send between 10.30 in the evening and 8.15 in the morning.
3.3.3
FTP & Web settings
The V-Tap VoIP has a build in FTP (File Transfer Protocol) server that
allows you to access the internal filing system. At this moment, this is
only used for updating the firmware remotely (see chapter Update
Firmware). FTP can be disabled by setting the FTP Port to 0 (zero).
FTP & Web User name
User name to log in with FTP and the Web service.
Default “admin”.
The single and double quotation marks (‘ and “)
cannot be used !
FTP & Web Password
Password to log in with FTP and the Web service.
Default “admin”.
The single and double quotation marks (‘ and “)
cannot be used !
FTP Port Number
By default, the FTP Port is on 21 for normal FTP access.
The PC tool ‘vcUpdater’ uses FTP to update the firmware of the V
-
Tap unit. This tool can be found on the Vidicode website in the menu
Service and Support > Firmware.
By setting the FTP Port to 0 (zero), FTP is disabled completely.
