Videx KRA76, Руководство пользователя, Страница: 6 / 16

66250930 - V4.0 - 15/05/19 - 6 -
Kristallo Series
Art. KRA78-KRA76 - Installation instructions
FLUSH KRISTALLO INTERCOM – MOUNTING INSTRUCTIONS
1. Protect the holes to fix the intercom to the flush mounting box then embed the flush mounting box in line with the wall in vertical
position at 135cm height from the floor as shown in Fig. 1 ;
2. As shown in Fig. 2 , connect the wires using a flat screw driver then setup the dip-switches as per provided connection diagram
or instruction sheet.
3. As shown in Fig. 3 , once the wires are connected, fix the intercom to the flush mounting box using a Phillips screwdriver and the
two screws provided.
In order to avoid malfunctions, please do not over tighten the fixing screws shown in Fig. 3.
4. Once the intercom is fixed to the flush mounting box, place the front plate against the intercom by inserting the hooks in the
corresponding openings and hook the plate by pushing it down as shown in
Fig. 4
.
5. Test the system for correct operation.
SURFACE KRISTALLO INTERCOM – MOUNTING INSTRUCTIONS
1. As shown in
Fig. 5
, place the intercom against the wall at 135cm height from the floor and mark the fixing holes. Make the holes
(5mm diameter) and insert the provided wall plugs as shown in
Fig. 6
.
2. As shown in
Fig. 7
, connect the wires using a flat screw driver then setup the dip-switches as per provided connection diagram
or instruction sheet.
3. As shown in
Fig. 8
, once the wires are connected, fix the intercom to the wall using a Phillips screwdriver and the two screws
provided.
In order to avoid malfunctions, please do not over tighten the fixing screws shown in Fig. 8.
4. Once the intercom is fixed to the wall, place the front plate against the intercom by inserting the hooks in the corresponding
openings and hook the plate by pushing it down as shown in Fig. 9 and hang the handset as shown in Fig. 10 .
5. Test the system for correct operation.
Kristallo Series
Flush and surface intercoms wall mounting instructions