1. Charge
The battery is built-in lithium rechargeable battery, so when you use it the first time, please
charge firstly. The method for charging as following:
1.) Connect computer: use USB cable to connect the computer, then it can be charged.
2.) Use adaptor: connect charger plug with USB cable, then plug into electrical connector
receptacle, it can be charged.
When you charge it, green light will bright simultaneously.
When the green light is not
flashing, the charge is completed.
Notice: when battery power is not enough, VSDC-01SS will enter into protection mode, so
it cannot be turn on. Now, please charge for it.
2. Power / take photos
Please confirm already insert the TF card in the slot.
Push
“
ON/OFF
”
button to
“
ON
”
, long press button, after four long green light flashes, enter
the standby mode. Short press button, the green light flashes once then turns off, start
taking pictures manually, and then short press button, the green light lit, enter the standby
mode, and save the file, saved a video document automatically every 5 minutes. For
continuous recording, you can short press button again.
3.
Motion detection recording
Please verify that the T-F card is inserted into the product!
Push
“
ON/OFF
”
button to
“
ON
”
, long press button, after four long green light flashes,
enter the standby mode.
Continuous short press button twice, the green light flashes
three times then turns off into the camera motion detection mode, save a video
document automatically every 5 minutes. Then short press button, the green light lit,
enter the standby mode, and save the file.
Notice:
a. Please make sure T-flash (Micro SD) card has been inserted, if not, it will be power
off automatically after 4 seconds, And easy to cause system halted
b. The maximum capacity of T-flash card is 16GB.
c.
Saving file needs certain time, so please don
’
t press Operation button continuously in
order to avoid saving unsmoothly and generating incomplete file.
d. When you make a video, please focus on the object and keep 50cm under sufficient
illumination. Then the video will be right, natural color, clear and stable.
4.
Shutdown
In the pause, ON / OFF button in the ON position, long press button then turns off.
5
．
Time set
1. In the off state, connected to the computer.
2. In the memory card
to create a new document called time. TXT
3. Open time.TXT document, enter the time format is as follows: 2010-01-01
16:12:10 ,Save the document.
4. Exit the computer connected, unplug the USB data cable. At this point, the machine
