Instruction For Use for Time-signal Clock
I. Basic functions
1. 5 buttons: HR, MIN, SET, LIGHT, TALK/SNZ;
2. The time & minute can be displayed in a 3.5 bit
LCD panel
.
Time-showing
system of
12 hours and 24 hours
is available
;
3. Multiple rings for choice: Beep, cock, etc.
5 melodies for option
.
4. The time alarm will be triggered every 10 minutes if the clock is on the snooze
function. It can alarm 6 times maximally.
5. Two on-the-hour alarm functions for choice;
6. The ring of
“
Beep
”
will be become louder generally.
And it will last 1 minute
;
7. If
adopting
the melody as the ring, the clock will alarm when the melody ends.
II. Function operation
1. When switching the power on, the whole LCD will display; after the ring of a melody
ends, the clock will display time;
2. Press
“
Set
”
button under the Time mode to set as per the following sequences (the
display will flash simultaneously):
Time setting
→
Alarm setting
→
On-the-hour alarm setting
3. Press
“
HR
”
button under the Time Setting mode to set hour and
“
MIN
”
button to set
minute;
4. Press
“
HR
”
button under the Alarm Setting mode (Symbol:
) to set hour and
“
MIN
”
button to set minute. Press
“
SNZ
”
button when alarming, the clock will re-alarm
every 10 minutes, and will send alarm by 6 times at most;
5. Under the On-the-hour Alarm Setting mode (the symbol of alarm and the on-the-hour
alarm will flash):
It will open and close the function (Symbol:
) by pressing the
“
HR
”
button, but send
alarm during the time from 7:00am to 9:00pm (Symbol:
); it can activate the inactivate
the alarm ring by pressing
“
MIN
”
button (Symbol:
).
6. Under the Time Mode and if the
“
HR
”
button is pressed, it can shift the hour system
(12/24 hour system); by pressing
“
MIN
”
button, it can select the alarm ring.
7. Under any modes, it can turn the background light off by pressing the
“
LIGHT
”
button.
8. Under any modes, it can report the time by pressing the
“
TALK
”
button.
