Videotron EMG2926-Q10A, Руководство пользователя

Страница: 50 / 178

EMG2926-Q10A User’s Guide
50
C
HAPTER
6
Tutorials
6.1 Overview
This chapter contains tutorials for setting up your EMG2926-Q10A.
• Set Up a Wireless Network with WPS
• Configure Wireless Security without WPS
• Using Multiple SSIDs on the EMG2926-Q10A
6.2 Set Up a Wireless Network with WPS
This section contains an example of how to set up a wireless network using WPS. This example uses
the EMG2926-Q10A as the AP and NWD210N as the wireless client that connects to a notebook.
Note: The wireless client must be a WPS-aware device (for example, a WPS USB adapter
or PCI card).
There are two WPS methods for creating a secure connection. This tutorial shows you both.
• Push Button Configuration (PBC) - create a secure wireless network simply by pressing a
button. See Section 6.2.1 on page 50 .This method is easiest.
• PIN Configuration - create a secure wireless network simply by entering a wireless client's PIN
(Personal Identification Number) in the EMG2926-Q10A interface. See Section 6.2.2 on page 51 .
This is a more secure method, as one device can authenticate the other.
6.2.1 Push Button Configuration (PBC)
1
Make sure that your EMG2926-Q10A is turned on, that the WIFI button (on the side panel of the
EMG2926-Q10A) is pushed in, and that the device is placed within range of your notebook.
2
Make sure that you have installed the wireless client (this example uses the NWD210N) driver and
utility on your notebook.
3
Find the WPS settings in the wireless client utility. Enable WPS and press the WPS button ( Start or
WPS button)
4
Log into EMG2926-Q10A’s Web Configurator and press the Push Button in the Configuration >
Network > Wireless LAN 2.4G > WPS Station screen.