Videotec WASNX, Инструкция по эксплуатации

Страница: 7 / 74

Instruc
tion manual - English - EN
5 MNVCWASNX_1915_EN
• The device must only be opened by specialist
technical staff. Tampering with the device will
invalidate the guarantee.
• Be careful not to use cables that seem worn or old.
• The device must be properly connected to the
earth circuit.
• The device can only be considered to be switched
off when the power supply has been disconnected
and the connection cables to other devices have
been removed.
• Before powering the device install an overload
protection device in the building electrical system.
• For technical services, consult only and exclusively
authorized technicians.
• Keep this handbook carefully; it must be available
for consultation on the installation site.
• Never, under any circumstances, make any
changes or connections that are not shown in
this handbook. Improper use of the appliance
can cause serious hazards, risking the safety of
personnel and of the installation.
• Use only VIDEOTEC original spare parts.
4 Identification
4.1 Product description and type
designation
The WASNX washer pump is an important element
for effective video surveillance because it guarantees
sharp images in all environmental conditions and
reduces the need for maintenance.
The WASNX system is designed for operate in special
environments such as marine, industrial, chemical
and where the external conditions are highly
corrosive.
The wash system is also compatible with third-party
products.
The kit includes a stainless steel 10-litre tank with
solenoid valve.
4.2 Product marking
See the label attached to the product.
Product marking is also seen inside the product, on
the label positioned as illustrated in the figure.
Fig. 2