EN - English - I
nstruc
tion manual
2
MNVKMBXWRE_1926_EN
5 Preparing the product for
use
Any change that is not expressly approved
by the manufacturer will invalidate the
guarantee.
5.1 Unpacking
When the product is delivered, make sure that the
package is intact and that there are no signs that it
has been dropped or scratched.
If there are obvious signs of damage, contact the
supplier immediately.
When returning a faulty product we recommend
using the original packaging for shipping.
Keep the packaging in case you need to send the
product for repairs.
5.2 Safely disposing of packaging
material
The packaging material can all be recycled. The
installer technician will be responsible for separating
the material for disposal, and in any case for
compliance with the legislation in force where the
device is to be used.
5.3 Contents
Check the contents to make sure they correspond
with the list of materials as below:
• Maneuver wrench
• Instruction manual
6 Usage
Before carrying out any type of
intervention, read carefully the product
manual.
6.4 Product opening (MAXIMUS
MBX)
During product opening and closing
operations, be careful not to damage the
flameproof joint.
The safety grub screw is used to prevent
the unscrewing of the threaded cover from
the connection compartment. Remove the
safety grub screw before unscrewing the
cover.
Couple the lid using the two slots on the manoeuvre
key. Unscrew the lid working in an anti-clockwise
direction.
Fig.
1
