Videotec MAXIMUS MVX DELUX, Инструкция по эксплуатации

Страница: 10 / 88

EN - English - I
nstruc
tion manual
8 MNVCMVXHDBCAM_1813_EN
6 Configuration
6.1 Default IP address
The unit is configured to obtain an IP
address from a DHCP server.
The IP address acquired via DHCP is visible in the
DHCP server log file.
If the DHCP server is not available, the unit
automatically configures itself with a self-generated
IP address in the 169.254.x.x/16 subnet. Configuring
the IP address of the PC as belonging to the same
subnet (example: IP address: 169.254.1.1, subnet
mask: 255.255.0.0).
Use an ONVIF compatible VMS or a network sniffer to
find the IP address of the device (IP scan utility).
6.2 Web interface
Browsers supported: Microsoft Internet
Explorer, Microsoft Edge, Google Chrome,
Mozilla Firefox.
6.2.1 First access to the web pages
The first operation in configuring the device consists
in connecting to the web interface.
To access the web interface of the product, simply
use a browser to connect to http:/ ip_address.
7 Accessories
A series of accessories for the device in use
is available. Refer to the HANDBOOK A for
relative descriptions.
8 Instructions for normal
operation
8.1 Enabling the wiper (Wiper)
Do not use the wiper if the outside
temperature is below 0°C or in case of ice.
To activate/deactivate this function, refer to the
manual of the control device used or to the relative
chapter (8.3 Special controls, page 8).
8.2 Enabling the washer (Washer)
To activate/deactivate this function, refer to the
manual of the control device used or to the relative
chapter (8.3 Special controls, page 8).
8.3 Special controls
SPECIAL CONTROLS
Action Command
Protocol
HTTP API1 ONVIF (auxiliary
command)
Wiper Start Save Preset 85 tt:Wiper|On
Wiper Stop Save Preset 86 tt:Wiper|Off
Washer Save Preset 87 tt:Washing Proced
ure|On
Night Mode On Save Preset 88 tt:IRLamp|On
Night Mode Off Save Preset 89 tt:IRLamp|Off
Night Mode Auto – tt:IRLamp|Auto
Reboot the device Save Preset 94 –
Tab. 4 1 For further information please contact the VIDEOTEC
service center.