Videoswitch VK-1, Руководство пользователя

Страница: 9 / 13

VK-1 Remote Keyboard User Manual 23/09/2004 11:09
Videoswitch Page 8 Vk602b.doc
2 Front Panel Controls
These keyboards are designed for the control of VDM-4, VDM-9 and VDM-16 Digital Recorders. A single
keyboard can control up to such 8 devices, each having up to 16 cameras and two monitors.
SEA
RCH
SET
UP
IN
CI
DEN
TS
EV
EN
TS
1 2 3 4 5 6 7 8
EVENT EVENT
PLAYBACK CONTROL
CAMERA SELECT
POWER
9 10 11 12 13 14 15 16
PIP/ZOOM
POSITION
2
1
Í
Í
Digital Multiplexer
SPOT MONITOR
ALT
MAIN SPOT
INFO SET START SET END CLEAR
INCIDENT MARKERS
Í
Í
Í
Í
NO DEFAULT YES ZERO
2.1 Configuring VDM Digital Recorder
The keyboard port of the VDM Digital recorder must be enabled (usually as a clock master) in order to
accept command from a keyboard. An Engineer menu option is provided for this purpose. Refer to the VDM
manual for details.
2.2 Full Control
The switch on the underside of the unit must be “OFF” in order to enable the VK-1 to have full control of a
VDM recorder, subject to password access restrictions (refer to section 2.3 for diagram).
The keys have the same layout and function as the keys build into the VDM recorder itself. Refer to the VDM
operating manual for details.
2.3 Spot Monitor Only Control
The keyboard may be configured to provide control of the spot monitor only. The switch on the underside of
the unit should be “ON” to select this option (refer to section 2.3 for diagram). In this mode, the only keys
that have a function are the cameras keys
1,2,3…16
which directly select camera for display on a spot
monitor. The spot monitor auto-sequencing key is the only other key that has a function in this mode.
2.4 Addressing more than one VDM Digital Recorder
If more than one VDM Digital Recorder is connected to a single keyboard, each one must be configured with
a different address (01, 02, 03 etc).
Before a particular VDM Digital Recorder can be controlled by the VK-1, it must first be selected. To do this,
simultaneously press the
ALT
key, the
Í
(left arrow) key and one of the camera select keys
1,2,3,4,5,6,7
or
8
.
The VDM recorder which has the address corresponding to the camera key pressed will be selected and
ready to be controlled. The address remains until another one is selected or if power has been removed
from the keyboard, in which case it will default to address 01.
Intelligent Security and Fire Ltd