- 1 -
Package Contents
Check the following contents of your package:
PoE Switch x 1
User Guide x 1
Power Cord x 1
Accessories(Feet*4)
If any part is lost and damaged, please contact your local agent immediately.
Introduction
The 4+2 10/100Mbps Provides the seamless network connection. The PoE ports (Port1~4) can automatically detect and
supply power with those IEEE 802.3af/at compliant Powered Devices (PD). The electrical power is transmitted along with
data in one single cable allowing you to expand your network where there are no power lines or outlets, where you wish
to fix devices such as AP, IP Cameras or IP Phones, etc.
It is easy to install and don’t need to configuration. With outstanding performance and quality, the 6-port 10/100Mbps
desktop PoE switch is an ideal choice for expanding your home or office network.
Hardware Description
Front Panel
The Front Panel of 4+2 10/100Mbps Consists of 6-Port 10/100Mbps Ethernet RJ45 Ports. The LED indicators are also
located on the panel.
DIP Switch
The DIP switch located on the left panel.
Default mode:
when CCTV close
d
the factory default mode can normal communication between port 1~6.
CCTV mode: 1-4 port can be isolated each other but 1-4 port can connect to 5, 6 port after open CCTV to stop broadcast
storm to increase forwarding rate of frame. The CCTV mode, Up to 250m PoE distance allows you to
expand you network via Ethernet cable to where there is no power line or outlet but where you want to fix
device such as IP Cameras.
Note: After change the mode, in order to make the corresponding configuration take effect you need to manually restart
the PoE switch.
