7. OSD Architecture
7.1. 20” Monitor Video Function
Doc # INS-45M20-1
Issue Date: 10/08/08
Under AVI Mode:
Press the ITEM button to bring up the OSD Menu,
then press ITEM again to enter submenu.
As shown, press
keys to adjust selection.
Figure 2. Example
Note: In remote control, press
key to adjust.
Video
Sub-Menu
Contrast
Brightness
Color
Sharpness
Tint
Menu
(After adjustment, the monitor will store new settings)
Contrast
Permits adjustment for contrast between light or dark areas of the picture.
Brightness
Adjusts the overall picture shade and brightness. Tip: Use the Brightness to make details in
the dark areas of the picture to be just visible, and Contrast to brighten the picture without
causing video noise and foreheads to turn white.
Color
Adds color to the black and white picture content (of a color signal), and is usually set for
viewer's preference in color saturation.
TINT
Adjusts the colors on the screen. Reds and yellows are most noticeable. Tint also sets for
pleasing facial tones. Note: Appears in NTSC mode only.
Sharpness
Sets the desired sharpening enhancement to the picture.
Revision: A
Page 7 of 13