AUTO
This camera has an IR Cut-Filter and automatically changes to
the appropriate mode according to lighting levels. To set the
switching time and switching speed for the AUTO mode, press
the SET button.
COLOR
The picture is displayed in color.
B/W
The picture is always displayed in black and white.
IMAGE ADJ.
In the SETUP menu, select 'IMAGE ADJ.' using the UP &
DOWN buttons.
FREEZE
View still pictures
OFF / ON selectable
FLIP
OFF / HORIZ / VERT / BOTH selectable
SHARPNESS
The outline of the video image becomes cleaner and more
distinctive as the level of SHARPNESS increases. If the level
goes up excessively however, it may affect the video image and
generate noise.
The available range of level is -8 ~ 8
COLOR GAIN
To control the color level in the video.
The available range of level is -8 ~ 8
GAMMA
Change the gamma setting between 25 and 100
SPECIAL
Within the SETUP menu, select 'SPECIAL' by using the UP &
DOWN buttons.
CAMERA ID
User can enter a unique name for the respective camera.
The maximum length of the ID is ten characters.
ㆍ
You can choose ON or OFF.
If you select ON, the entered camera ID is displayed at the selected
position in the video picture (normal operation).
ㆍ
Please select the setup button while in ON mode.
ㆍ
Select the desired position with the selector.
1)
Move the cursor to the letter required by pressing the UP button.
2)
Select an ID from A,B~Y,Z, a,b~y,z, 0,1~8,9 by using the LEFT
and RIGHT buttons.
3)
Repeat the above steps until the ID is complete.
1)
Select the position where the ID is to be displayed by using the
LEFT and RIGHT buttons.
VIDEO I/O
Move the cursor to select the video system.
- VIDEO STANDARD
You can control NTSC / PAL,
Video level, Sync level, Burst level
VIDEO OUT
Interlace/Progressive Video selectable
DIGITAL OUT
Digital output ON/OFF selectable
656 OSD
Digital output OSD ON/OFF selectable
FIELD ORDER
Normal/Reverse Field selectable
DZOOM
Digital P/T/Z are used to create a zoom lens effect.
Zoom Factor (1X to 8X), Pan (±100%, center of image can
be moved to left and right edges of screen), Tilt (±100%,
center of image can be moved to top and bottom edges of
screen)
MOTION
This product has a feature that allows you to observe
movements of objects in on the screen, hence a single
individual can conduct supervision efficiently. The camera
detects an object's movement by sensing disparity of
outline, and level of brightness and color.
White
MOTION ZONE Position movement
Green
MOTION ZONE Size enlargement
Red
MOTION ZONE Size reduction
To confirm the MOTION ZONE, press & hold the SET button
PRIVACY SETUP
Hide an area you want to hide on the screen.
White
PRIVACY-ZONE Position movement
Blue
PRIVACY-ZONE Size enlargement or reduction
To confirm the PRIVACY-ZONE, press & hold the SET
button
SYNC
Two synchronization modes are available, INTERNAL and
EXTERNAL LINE LOCK.
In LINE-LOCK mode, it synchronizes the video signal
between cameras without asynchronous generator.
The line-lock synchronization is only used in areas of 60Hz
(NTSC)/50Hz (PAL).
INT Internal
synchronization
LL
External line-lock synchronization
If 'LL' is selected, it can be adjusted to the desired
phase. Press the SET button to save.
Adjust to the desired phase from 0 to 624.
RS 485 SETUP
This function sets up the camera communication status
when controlling the camera through an external control
device.
EXIT MENU
Saves all the setting menus and then exits.
SPECIFICATIONS
MECHANICAL
PIN ASSIGNMENT
DAY&NIGHT SETUP
TIME DELAY
PREVIOUS PAGE.
5
0
20
SETUP
PRESETS
EXPOSURE..
WDR
WHITE BALANCE
DAY/NIGHT
IMAGE ADJ..
SPECIAL..
EXIT MENU.
NORMAL
MIDDLE
ATW
AUTO..
IMAGE
FREEZE
FLIP
SHARPNESS
COLOR GAIN
GAMMA
PREVIOUS PAGE..
OFF
OFF
-8
4
8
2
-8
8
25
45
100
BOTH
VERT
HORIZ
OFF
SETUP
PRESETS
EXPOSURE..
WDR
WHITE BALANCE
DAY/NIGHT
IMAGE ADJ..
SPECIAL..
EXIT MENU.
NORMAL
MIDDLE
ATW
AUTO..
SPECIAL
CAMERA ID
VIDEO I/O..
DZOOM
MOTION
PRIVACY SETUP..
SYNC
RS485 SETUP..
RESET
RETURN
OFF
OFF
OFF
CAMERA ID
ID
POSITION
PREVIOUS PAGE.
CAM-001
UP-LEFT
CAMERA ID
ID
POSITION
PREVIOUS PAGE.
CAM-001
UP-LEFT
VIDEO STANDARD
VIDEO SELECT
VIDEO LEVEL
SYNC LVL
BURST LVL
COLOR BAR
PREVIOUS PAGE..
0
0
OFF
NTSC
80
110 150
-16
15
-16
15
MOTION DETECTION
ACTIVITY THR.
MESSAGE TIME
SETUP MOTION ZONE..
PREVIOUS PAGE.
0
25 225
1
3
10
MOTION ZONE SETUP
PRIVACY MASK SETUP
PRIVACY MASK
MASK COLOR
PREVIOUS PAGE.
OFF
WHITE
ENABLE MASKS (1 to 6)
MASK 1
MASK 2
MASK 3
MASK 4
MASK 5
MASK 6
PREV. NEXT.
ON
OFF
OFF
OFF
OFF
OFF
ENABLE MASKS (7 to 12)
MASK 7
MASK 8
MASK 9
MASK 10
MASK 11
MASK 12
PREV. NEXT.
OFF
OFF
OFF
OFF
OFF
OFF
VIDEO I/O
VIDEO STANDARD..
VIDEO OUT
DIGITAL OUT
656 OSD
FIELD ORDER
PREVIOUS PAGE..
INTERLC
OFF
ON
NORMAL
DZOOM
ZOOM
PAN
TILT
PREVIOUS PAGE..
1
0
0
-100
100
1
12
-100
100
LINE LOCK
V PHASE
PREVIOUS PAGE.
0
519 624
RS485 SETUP
CAMERA # :
PROTOCOL
BAUD RATE
PREVIOUS PAGE.
1 < 1 > 255
PELCO-D
< 2400 >
< 4800 >
< 9600 >
< 19200 >
SETUP
PRESETS
EXPOSURE..
WDR
WHITE BALANCE
DAY/NIGHT
IMAGE ADJ..
SPECIAL..
EXIT MENU.
NORMAL
MIDDLE
ATW
AUTO..
DAY/NIGHT (2xC40xWD models only)
How to Use the Camera
How to Use the Camera
How to Use the Camera
How to Use the Camera
Dimensions W x H x D
42mm x 42mm x 9.05mm
(1.65” x 1.65” x 0.35”)
Weight
12g (0.42oz)
Lens Mounts
Ex: Change 20C40
X
W to
20C40
5
W to select an
M-12 Board Mount.
Change 20C40
X
W to
20C40
6
W to select an
M-14 Board Mount.
Replace “X” in model number with desired lens
mount option:
5 = Metal M-12 Board
6 = Metal M-14 Board
Lens
See our lenses at www.videologyinc.com
ACCESSORIES
Included
BNC/power cable
Optional
60ZRC10
OSD control board
60C1001
30 pin - 20 pin digital output cable
(digital camera only 20/21C40XWD)
IRIS
I/O
PELCO-D
MAIN CONNECTOR
Digital Signal
