WDR
When the image has simultaneous bright and dark areas, the
Wide Dynamic Range makes both areas distinct.
LOW / MIDDLE / HIGH / USER selectable
Use the White Balance function to adjust the screen colors.
1. Move the cursor to point to ‘WHITE BAL’ on the ‘SETUP’
menu screen, select using the UP & DOWN buttons.
2. Select the desired mode by using the LEFT & RIGHT buttons.
Select one of the following 5 modes:
ATW
The ATW mode continuously monitors.
INDOOR
Select for color temperature between 4000K˚ & 8500K˚
OUTDOOR
Select for color temperature between 2000K˚ & 11000K˚
AWB
To obtain the optimum state under the current luminance levels,
point the camera at a sheet of white paper and press the ‘SET’
button. If the environment changes, including the light source,
the white balance will require re-adjustment.
MANUAL
Select to "fine-tune" the White Balance manually.
First set the White Balance with ATW or AWB. Then switch to
MANUAL, fine-tune and then press the ‘SET’ button to save.
Settings can be made using the 5 buttons located on the OSD
control board.
1. Press the SET button on the control board to display the SETUP
window.
2. Select an option from the list available by using the UP & DOWN
buttons on the control board.
ื
The selected position is displayed in blue.
3. Change the status by using the Left and Right buttons.
4. To finish and save the settings, select 'EXIT' and press the SET
button on the control board.
Three types of presets
NORMAL : default color balance
INDOOR : fluorescence color balance
OUTDOOR : outdoor color balance
SETUP
PRESETS
EXPOSURE..
WDR
WHITE BALANCE
NORMAL
MIDDLE
ATW
How to Use the Camera
SETTINGS
SETUP
PRESETS
EXPOSURE..
WDR
WHITE BALANCE
DAY/NIGHT
IMAGE ADJ..
SPECIAL..
EXIT MENU.
NORMAL
MIDDLE
ATW
AUTO..
UP
LEFT
RIGHT
DOWN
SET
SETUP
PRESETS
EXPOSURE..
WDR
WHITE BALANCE
DAY/NIGHT
IMAGE ADJ..
SPECIAL..
EXIT MENU.
NORMAL
MIDDLE
ATW
AUTO..
Select the function
using the UP or
DOWN buttons
Change the status
using the LEFT or
RIGHT buttons
PRESETS
EXPOSURE
NOTE: An item with the .. icon has sub-menus.
To select a sub-menu, press the SET button.
SETUP
PRESETS
EXPOSURE..
WDR
WHITE BALANCE
DAY/NIGHT
IMAGE ADJ..
SPECIAL..
EXIT MENU.
NORMAL
MIDDLE
ATW
AUTO..
SETUP
PRESETS
EXPOSURE..
WDR
WHITE BALANCE
DAY/NIGHT
IMAGE ADJ..
NORMAL
MIDDLE
ATW
AUTO..
How to Use the Camera
LENS MENU
DC GAIN
VIDEO GAIN
AI THRESH
PREVIOUS PAGE.
0 120 255
-24
50
0
255
-48
60
FOCUS DETECTOR
FOCUS METER
SET FOCUS REGION..
PREVIOUS PAGE.
88
SET FOCUS REGION
How to Use the Camera
WDR LEVEL
BIAS
LIMIT
PREVIOUS PAGE.
2
36
-30
30
0
36
MANUAL WHITE BALANCE
RED
BLUE
PREVIOUS PAGE.
-18
13
-20
20
-20
20
SETUP
PRESETS
EXPOSURE..
WDR
WHITE BALANCE
DAY/NIGHT
IMAGE ADJ..
SPECIAL..
EXIT MENU.
NORMAL
MIDDLE
ATW
AUTO..
EXPOSURE
LENS
FOCUS..
EXPOSURE MODE
AGC
DNR
HIGHLIGHT
COLOR ROLL
SENS-UP
PREVIOUS PAGE.
DC..
60
MIDDLE
MIDDLE
ON
LOW
2X
i
When the menu screen ‘SETUP’ is displayed, select ‘EXPOSURE’
by using the UP & DOWN buttons so that the arrow indicates
‘EXPOSURE’.
LENS
This function controls the screen’s brightness.
GGGGGGGGGื
DC / Manual : Select Lens Type
FOCUS
This function adjusts the DC & VIDEO lens focus
EXPOSURE MODE
Select the number of fields and number of exposure cycles.
60i/30p
selectable
AGC (AUTO GAIN CONTROL)
In a dark situation, the higher the gain level, the brighter the screen,
but there will be more noise within the video .
OFF / LOW / MIDDLE / HIGH selectable
DNR (Digital Noise Reduction)
The level of background noise in low light decreases automatically
as the level of gain changes.
OFF / LOW / MIDDLE / HIGH selectable
HIGHLIGHT
To optimize the scene when high dynamic range lighting is
detected.
ON : bright parts of the image are most visible
OFF : dark parts of the image are most visible
COLOR ROLL
To control a detector that finds color fluorescent roll.
OFF / LOW / MIDDLE / HIGH selectable
SENS-UP
When it is night or dark, the camera automatically detects the light
level and maintains a clear picture if this mode is activated.
2X, 4X, 8X, 16X, 32X
OFF : Deactivates the SENS-UP function.
WDR
WHITE BALANCE
NOTE: Under the following conditions, White Balance may
not work properly. In such cases, select the AWC mode.
1) When the color temperature of the subject environment has a very high
temperature range (e.g. clear sky, or sunset)
2) When the ambient illumination of the subject is low
3) If the camera is directed toward a fluorescent light, or is installed in a
place where illumination changes dramatically, the White Balance
operation may become unstable.
WDR Day/Night
Color Board Camera
MODELS (NTSC/PAL)
20/21C40xW
analog output
20/21C40xWD digital
output
01/18/11 INS-20C40XW Rev B Preliminary
PRODUCT FEATURES
• 1/3” Pixim CMOS progressive scan
• 690 TVL resolution
• Low 0.1 lux sensitivity
• Dynamic range to 120dB
• Global shutter
• Digital video output (see optional models)
• 3D motion adaptive noise reduction (DNR)
Features available via OSD control board (60ZRC10)
• Motion detection
• Day/night mode
• Digital pan/tilt/zoom (8x)
• Digital slow shutter (DSS)
• Push to set white balance
• Sens-up (2x-32x)
• NTSC/PAL selectable
• RS-485 (optional)
CONTACT INFORMATION
For technical assistance with this product, please
contact the supplier from whom the product was
purchased.
For OEM inquiries:
North/South America
37M Lark Industrial Parkway
Greenville, RI 02828
USA
Tel: (401) 949-5332
Fax: (401) 949-5276
Please visit our website at: http://www.videologyinc.com
VIDEOLOGY IMAGING SOLUTIONS is an ISO 9001 registered
video camera developer and manufacturer serving industrial,
machine vision, biometric, security, and specialty OEM markets.
Videology designs, develops, manufactures, and distributes
video, image acquisition, and display technologies and products
to OEMs worldwide.
Europe
Neutronenlaan 4
NL-5405 NH Uden,
Netherlands
Tel: +31 (0) 413 256 261
Fax: +31 (0) 413 251 712
shown with optional lens
