USB Laptop Camera Installation
& Quick Start Guide
Page 12
Precautions
•
Do not scratch, nick or damage or disassemble the USB cable.
•
Do not touch the USB plug with wet hands.
•
Refer disassembling, modification and repair of the product to qualified service personnel.
•
Do not store the camera in heat generating apparatus such as a microwave oven, or
pressurized container.
•
Do not leave the camera in a hot location, such as under direct sunlight, inside of a car or near
a heater.
•
Do not use or leave the camera in a dusty or humid place.
•
Do not directly connect the power source to the USB connector.
•
Do not direct the lens of the camera toward the sun; the camera may be damaged
•
Do not touch the lens. If it is becomes dirty, wipe gently with a soft dry cloth.
•
Do not drop the camera.
•
Never touch the connection terminal of the camera, as static electricity could render it unusable.
Also avoid allowing foreign objects to touch the connector.
•
Connect or disconnect by grasping the USB connector.
•
Do not handle the camera with wet hands.
•
Avoid using or placing the camera in a location near water filled containers.
•
Keep the camera as free from shock and vibration as possible.
VideoLabs, Inc., 5960 Golden Hills Drive, Golden Valley, MN 55416-1040
Telephone 612-542-0061 Fax 612-542-0069 Internet http//www.videolabs.com
VideoLabs
is a registered trademark of VideoLabs, Inc.
Specifications subject to change without notice.
1999 VideoLabs, Inc. All Rights Reserved. Form # 012700
