Mounting
>
Use proper tools and hardware.
>
Mount indoors in a temperature-controlled environment.
>
Mount the detector 2.1 to 2.3 m (6.9 to 7.5 feet) from the floor.
>
Mount the detector on an outside wall, aimed at area
to be protected.
>
Do not aim detector at windows, especially those that
let in direct sunlight, or at heat sources such as lamps,
fireplaces, radiators, and heating vents.
>
Do not aim detector at moving objects such as curtains,
fans, or animals in cages.
Regulatory Information
FCC Part 15
This device complies with FCC Rules Part 15.
Operation is subject to the following two conditions:
1.) This device may not cause harmful interference and,
2.) This device must accept any interference that may be received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by
RSI VIDEO TECHNOLOGIES can void the user’s authority to operate
the equipment.
Specifications
Panel Compatibility
VIDEOFIED VISIO1000/V6000
Operating Frequency
868/915 MHz
Radio /type
Spread Spectrum Bidirectional RF
Power Requirements
One 3.6 V lithium battery
Battery Type
LS14500
Detection
Distance: 12 m/40 ft.
Angle: 90°
Operating Temperature
0°/+40°C (32°/104°F)
Maximum Relative Humidity
70%, non-condensing
Dimensions (LxWxD)
75 mm x 55 mm x 55 mm
3 in. x 2 in. x 2 in.
Weight
82 g/3 oz. (without battery)
Approvals CE / EN50131 (ITR110)
FCC (ITR600)
1
Separate base from detector.
2
Hold detector base against
mounting surface and mark the
two appropriate mounting holes.
3
Drill pilot holes and install anchors
where needed.
4
Mount detector base to surface
using appropriate screws
5
Install battery into detector,
observing correct polarity.
6
Place unit on the mounting surface so mounting holes
line up with pilot holes/anchors and secure the device
with the appropriate screws.
7
Attach detector to base and secure with screw.
EMEA SALES
2, rue Alexis de Tocqueville
92160 ANTONY
FRANCE
Phone +33 (0)1 55 59 10 25
Fax +33 (0)3 90 20 66 36
© 2008 RSI VIDEO TECHNOLOGIES. VIDEOFIED
TM
is a Registered Trademark of RSI VIDEO TECHNOLOGIES.
S
2
View
®
is a registered trademark of RSI VIDEO TECHNOLOGIES. Specifications subject to change without notice.
USA SALES
4455 White Bear Parkway, Suite 700
White Bear Lake, MN 55110
USA
Phone 877-206-5800
Fax 651-762-4693
www.videofied.com
Flat Wall Mounting
Corner Mounting Holes
I N S T A L L A T I O N I N S T R U C T I O N S
PIR Model ITR110/ITR600
