ZX-580SR240 / CX-580SR240 Manual REV.B May 2013
6
Focus & Zoom Adjustments
Step # 3
- To access the focus or zoom adjustment ports, remove the water tight caps by Rotating Counter-Clockwise.
(
Figure 3
)
Step # 4
- Using a mini flathead screw driver, adjust the focus & zoom rotary terminal to your desired settings.
(
Figure 4
)
Replace the water tight caps on the focus / zoom adjustment ports.
You Must Replace the Cover Cap to Ensure a Water Tight Seal
Water damage will void the warranty
Mounting Bracket Installation
Step # 1
- Securing the Base Plate
The ZX-580SR240 & CX-580SR240 require a flat mounting surface with the ability to hold a minimum of 5lbs to
support the camera & (depending on mounting-height) wind load. Designed for convenience with quick and easy
installations in mind, these camera feature a light weight mounting bracket base plate.
(
Figure 1
)
Using the included
screws and wall anchors, secure the base plate to your desired location.
Note:
For wireless applications, the camera must be mounted 15 Feet above all obstructions to ensure a clear line-of-
sight between the camera and your receiver location.
Step # 2
- Attaching the Camera
Use the included Allen Key & mounting screws to firmly secure the camera bracket to the base plate. The Allen Key is
also used to release & tighten the bracket joint to properly set your camera angle.
(
Figure 2
)
