Cable
①
Plug Bolt
②
Bracket
③
Self-Tapping Screws
④
Hook Holes
1.Bracket plate for indoor section
2.Plastic Expansion plug
3.Fixing screw
4.Holes for Hanging indoor section
1
.5
-1
.7
m
Notes: Do not expose the camera unit to direct
sunlight and be sure it is shield from storm rain. The
background of visitors may be affected by street lamp
and other strong light, you can mount some lamps to
highlight for clearer images of visitors.
The monitor is compatible with several camera units (ODS-J/ODS-S/ODS-5
ODS-A are optional.). Please verify the model no. before installation and follow
correct directions. The recommended location of camera unit is at the
height 150~170cm from central part of Camera to the floor (for reference only).
VII. Installing of Outdoor Station
①
Dig a square hole which is the same size of the Flush Box in the wall and drill a
hole in the center for wiring and 2 small holes for plug bolts.
③
Pull the wiring which connect to Monitor Unit through the central hole and
connect well with Terminals
“V, GND, A & +”
. Also prepare 2 wires to connect
with Lock Connectors
“UNL+ & UNL-”
and pull through Flush Box and central
hole in the wall and connect with the door lock.
④
Put the wired Camera Unit in the Flush Box and fix with 2 Hex Socket Cap Screws.
②
Fix the plug bolts in the 2 small holes and put the Flush Box into the wall and
fix with 2 self-tapping screws.
1
)
ODS-S
VDP-C33DVR Series
VDP-C37DVR Series
Hex Socket Screw Key
(Provided)
Put-in
Flush Box
Cable
①
Dig a square hole which is the same size of the Flush Box in the wall and drill
a hole in the center for wiring and 4 small holes for plug bolts.
②
Fix the plug bolts in the 4 small holes and put the Flush Box into the wall and
fix with 4 self-tapping screws.
③
Pull the wiring which connect to Monitor Unit through the central hole and connect
well with Terminals
“V, GND, A & +”
. Also prepare 2 wires to connect with Lock
Connectors
“UNL+& UNL-”
and pull through Flush Box and central hole in the
wall and connect with the door lock.
④
Put the wired Camera Unit in the Flush Box and fix with 4 drive screws.
2
)
ODS-5
