VIDEO DOMAIN TECHNOLOGIES MEMOCAM DVR, Руководство по началу работы, Страница: 17 / 29

Disarming MemoCam
®
DVR
To deactivate (disarm) MemoCam DVR:
1. Point the remote control unit at the
MemoCam unit and enter the disarm code
using the buttons labeled 1-4 on the remote
control unit (refer to Figure 5 on page 9).
2. Press Disarm (refer to Figure 5 on page 9).
The MemoCam unit beeps three times and
the Arm mode LED turns off.
The default disarm code is: 1234. To define a
new disarm code, refer to the MemoCam
Software Manual .
LED Indicators
As shown in Figure 2 on page 5, MemoCam
DVR has the following LED indicators:
Table 1. MemoCam LEDs
LED Color Description
Multimedia
Card Status
(left) Red Error or Multimedia
Card is faulty or not
inserted correctly
Blinking
Green
Data is being
written to the
Multimedia Card
Orange Multimedia Card is
full
Power (middle) Red Power is connected
Arm mode
(right)
Orange MemoCam unit is
in Arm mode
None MemoCam unit is
in Disarm mode
All LED indicators except the power LED
indicator can be enabled or disabled. Refer to
the MemoCam Software Manual.
¡
11