![Videcon VS76P12 Скачать руководство пользователя страница 9](http://html1.mh-extra.com/html/videcon/vs76p12/vs76p12_owners-manual_1015196009.webp)
Spinning Time For Laundry
1. Cotton clothes : 5~10 min.
2. Delicate clothes (Thin synthetic fiber, sarees etc.) : 2 min.
3. Sweater (Synthetic fiber) : 2-3 min.
4. Underwear (Knitting clothes) : 3~5 min.
1. Remove the power plug from main power supply.
2. Open the INNER LID and OUTER TUB COVER.
3. Pick up the laundry.
4. While placing the OUTER TUB COVER back, be
sure to push it firmly until front hook is engaged
securely.
In case of the laundry falling from the spinner tub
Washing Procedure
4. Set the SPIN TIMER
1-5 min Spin Timer
Step3:- SPINNING
Remove the clothes from spin tub then turn the drain selector knob to ‘DRAIN’ to discharge the washing water
power supply.
Step4:- Final Step
and turn the knob to 'WASH/RINSE' when water is completely drain out. Then remove power plug from main
1. Transfer the clothes in to the spin basket arrange
the clothes evenly.
2. Be sure to attach the safety cover and close the
inner lid
3. Close the Spin Lid
1. If there is a sound from the spinner tub, open the
spinner lid then try to lay the laundry evenly.
2. If the lid is open while the spinning function is
working, the machine will stop with in 5-10 seconds.
If it is still running, contact service center.
3. If the spinner lid is not closed, the machine will not
work even the timing is set.
Precautions while spinning
6
1-10 min Spin Timer
10
8
6
4
2
Spin Timer
Spin Timer
FILL AND DESPATCH WARRANTY CARD ELSE THE WARRANTY VOIDS
Warranty Terms and Conditions
17
1.
This warranty is confined to the original products of the
only
manufacturer
.
2.
The
or their authorised service
manufacturer
Agent / will repair / replace all parts failing due
to faulty material or defective workmanship pertaining to the above Washing Machine.
3.
Only the
or its authorised Service
manufacturer
Agent / can service/repair/attend to install/
reinstall the washing Machine. The list of
’s serivce centre is as printed
Manufacturer
overleaf.
4.
If the machine is not repairable at the place of its installation then the decision of
technician to call back the machine to Service Centre for repairs shall be final. In such
cases it is the responsibility of Purchaser to bring the machine to the Service Centre.
5.
For the units installed beyond the municipal limits of the jurisdiction of the authorised
service a
’
Manufacturer
s authorized service station or
’s dealers as well as
Manufacturer
expenses incurred in connection with deputing of service personnel/technicians towards
to and fro travel conveyance with deputing of service incidentials etc. will be borne by
the customer.
6.
Any change of location of the unit and / or change of ownership has to be done in
consultation with the
or its authorised service agent so that the warranty
Manufacturer
obligation for the remaining part of the warranty could be transferred to the new owners
or the original purchaser but at the new location.The unit so transferred will be inspected
by the
or its service agent at the cost inspection charges.
Manufacturer
7.
Any damage caused during shifting will be repaired on chargeable basis. In the event of
repair / replacement of any part/s of the set, this warranty will thereafter, continue and
remain in force only for the unexpired period as per the warranty card issued at the time
of purchase of the set. Moreover, the time taken for repair and in transit, whether under
the warranty or otherwise, shall not be excluded from the warranty period.
8.
This warranty will continue to be in force for the term herein specified, irrespective of
what replaced may be provided under it, and such replacement shall not attract any
fresh warranty unless specified.
9.
The warranty extended herein is in lieu of all implied conditions and warranties under the
law and is confined to the repair or replacement of defective parts and does not cover
any consequential or resulting liability, damage or loss arising from such defects.
Furthermore, the warranty in no case, shall extend to the payment or any monetary
consideration whatsoever of the replacement or return of the Washing Machine as a
whole.
10. The defective spare part/s shall be the sole property of
and will be collected
manufacturer
by the Authorised Service Centre / Franchisee.
11. It shall be the discretion of the
to replace the required part with suitable and
manufacturer
currently available part/s. The
may also use the substitute part for defective
manufacturer
part.
Manufacturer of this VIDEOCON Brand Washing Machine undertake that the product is warranted against
manufacturing defects for a period of 24 months, commencing from the date of purchase, the manufacturer
will repair or replace free of charge any part or parts of the Washing Machine except Top Lids, Inlet/Drain
due to faulty material or workmanship only. The warranty will be governed by the following clauses :
Hose and lint Filter, should the company be fully satisfied, in its sole discretion, that the defect/s is/are
Содержание VS76P12
Страница 4: ...1...