Press the sleep button to enter into first gear and exit automatic mode. Then all the
lights and display will turn off. The second function of the sleep button is to reset the
filter replacement indicator light when it is on (hold for 3-5 seconds).
When the machine is running, you can set the working time with the timer button. You
can set the time in increments of 30 minutes. The shortest time you can set is 30 minutes,
the longest is 12 hours. (It will display as 00:30, 1:00, 1:30....12:00). Five seconds after
setting the time, the display will go back to the PM2.5 value. After the timer is set, it will
run in the background, counting down in minutes. Hold the timer for 5 seconds to exit this
function. Press the button to display the remaining time left.
Press the child lock button to enter the child lock function. Hold the child lock button
for 5 seconds to exit the function. Hold the child lock button before entering the mode
to see total time filter has been used, between 0-1500 hours. After displaying for 5
seconds it will automatically exit the display.
While operating, press the auto button to enter automatic mode.
If you press the power button on the operational panel while the machine is running, the
machine will enter into standby mode.
3.
Powering Off
06
07
1. Powering On
Press the power button to start the machine. It will enter into automatic mode. At this
time the motor gears are controlled by the sensor. When the PM2.5 count is less than
120, the motor will run in first gear, with a speed of 430 rpm. When the PM2.5 count is
121-250, the motor runs in second at 600 rpm. When the PM2.5 count is 251-500, the
motor runs in third at 900 rpm.
Wind speed: press the wind speed button to change the wind speed, circulating between
1 and 3. When the button has been pressed, the machine will exit automatic mode.
2. Selecting the Operating Mode
Press the wind speed button to change the motor gear, circulating from 1 to 3.
When the wind speed is changed, the machine will exit automatic mode.
The anion button is for turning on the anion function
.
While operating in automatic mode, when the ambient light is <5lx for 3 minutes, the
machine will enter sleep mode. When ambient light is >5lx for 3 minutes, it will exit
sleep mode and continue running in automatic.
How to Use
Operation Panel
Display
Light Sensor
Operation Panel
Light Sensor
UV Sterilizer button is for turning on the UV light function.
