32E66-8
Battery Install
Remote Control
Your remote control handset is powered by two (2) AAA type batteries
• To insert the batteries, turn the
remote control over and remove
the battery over.
• Place two (2) “AAA” batteries into the
battery compartment with the “+” and
“-“ ends facing as indicated.
• Replace the cover
•
Effective remote range is approximately 16 feet at an
angle of no greater than 30° to the left / right or 20° up /
down to the IR sensor.
•
To avoid possible damage from battery chemical
leakage, remove the batteries if you do not plan to use
the remote for an extended period of time. Do not mix
batteries of different age and / or type. Always discard
used batteries safely.
•
Do not expose the remote control to liquids, direct sun-
light or sources of excessive heat.
•
The IR receiver on the TV will not work properly if the set
is in direct sunlight .
NOTE: Improper use of batteries can result in a chemical
leakage or explosion.
30
30
IR Receiver
32E66
Universal Remote Code:
To operate this TV using your Cable / Satellite remote, follow the programming instructions
included with the providers’ remote.
VIDAO Universal Remote codes:
Comcast or Direct TV : 10030.
AT & T (U-verse) : 1043.
RCA Universal : 0030.
Dish Network : 506.
