MAXIMUM TEMPERATURE CONTROL:
For an instant boost in temperature press the (
) button once, this will automatically set
the temperature at the maximum of 230ºC.
IONIC TECHNOLOGY:
Negative ions generated by the straightener help to lock in the natural moisture of your
hair and reduce static; leaving you with softer, shinier and more manageable hair.
To turn the IONIC feature on press and hold the (IONS) button for 2 seconds, the word
ION will appear on the LCD screen to indicate this feature is on. To turn the IONIC feature
off press and hold the (IONS) button for 2 seconds.
AUTOMATIC SHUT OFF:
Should you fail to turn off the appliance, it will automatically switch off after
approximately 30 minutes if no buttons are pressed. To reactivate press and hold the
(
) button for 2 seconds.
HINGE PIN LOCK:
This appliance has a lock which ensures that the product remains in a closed position when
not in use. The appliance can be locked (
) by turning the hinge pin clockwise. To unlock
the appliance (
) turn the hinge pin anti-clockwise to its original position.
STYLING:
To straighten, separate a two-inch section of hair, gently place the hair between the hot
smoothing plates and clamp down firmly on the handle. Slide the plates carefully down
the isolated section in a smooth, even motion from the root towards the ends of the hair.
This process should take approx. 5 to 8 seconds for fine hair and 10 to 15 seconds for thick
hair (the ends will probably require less heat than hair that grows closer to the root).
For best results, hold the ends of the hair while smoothing the section. Finally, release the
pressure on the handles and allow the hair to gently slide away from the plates. To create
a “flick”, use the rounded end of the plates to curl up or under the ends of the hair.
To create a curl from the straightener. Take a section of hair, placing the hair between the
plates. Simultaneously, roll & glide the straightener down through the hair. Working from
roots to ends. For defined curls take a smaller width of hair.
CLEANING:
Always unplug the appliance from the mains after use and allow it to cool before cleaning.
To clean, wipe the straightener and plates with a damp cloth. Ensure the appliance is
completely dry before use and that heated surfaces on the unit are free of dust, dirt,
styling sprays and gels.
WIRING:
The mains lead of this appliance is fitted with a 13 Amp (BS1363) rewirable plug fitted
with a 13 Amp fuse. If this is not suitable for the sockets in the home, it should be removed
and disposed of safely and a suitable plug should be fitted.
Proceed as follows: The wires in the mains lead are coloured in accordance with the
following code:
Blue
– Neutral
Brown
– Live
If the colours of the wires in the mains lead do not correspond to the coloured markings
identifying the terminals in your plug, proceed as follows:
The blue wire must be connected to the terminal marked with the letter N. The brown wire
must be connected to the terminal marked with the letter L. Never connect the blue or
brown wire to the earth pin E, when using a three pin plug. The appliance must be protected
by a 13 Amp fuse if a 13A (BS1363) plug is used.
OPERATING INSTRUCTIONS
This appliance is intended for household use only.
The appearance of this appliance may differ from the illustration.
IMPORTANT SAFETY INSTRUCTIONS
Please read all instructions before using this appliance.
WARNING:
Do not allow fingers to come into contact with the plates surface, as the surface is
extremely HOT!
Keep this appliance away from water. Do not use the appliance near or over water
contained in baths, sinks or similar water filled vessels. The appliance must not be handled
with wet hands, immersed in water, held under running water or allowed to become wet in
any way. Keep this appliance out of the reach of children and the infirm. Young children
should be supervised to ensure that they do not play with the appliance.
Do not allow bare skin or the eyes to come into contact with any heated surface on the
appliance when in use. Do not place an appliance on any heat-sensitive surfaces when hot
or plugged into the mains. Always unplug the appliance when not in use.
WARNING:
This appliance must not be taken into the bathroom. For additional protection,
the installation of a residual current device (RCD) with a rated residual operating current
not exceeding 30 mA is advisable in the electrical circuit. Ask your installer for advice.
WARNING: Do not use this appliance on synthetic hair or wigs. Use on dry hair only.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of appliance by a person
responsible for their safety.
STORAGE:
Always unplug when not in use.
Allow the appliance to cool before storing. Always store in a dry location. Do not pull or
twist the cord. Do not wrap the cord around the appliance, as this may cause the cord to
wear prematurely and break. If the power cord of this appliance becomes damaged,
it must be replaced by returning to the retailer from which the appliance was purchased, or
a similarly qualified person, in order to avoid a hazard. Regularly check the power cord for
wear and damage (particularly where it enters the appliance and the plug).
Should this product malfunction, do not attempt to repair it. This appliance has no
user-serviceable parts or components.
This product carries the CE mark and is manufactured in conformity with the
Electromagnetic Directive 2004/108/EC and the Low Voltage Directive 2006/95/EC.
HEATING THE APPLIANCE:
Plug the appliance into the mains socket. The Liquid Crystal Display (LCD) displays the
appliance heat levels and shows if the appliance is on or off. The display will illuminate
automatically when the unit is switched on. The LCD shows a standby function; when the
appliance is switched on at the mains only it will show the word OFF. To turn the
appliance ON, press and hold the (
) button for 2 seconds.
To increase or decrease the temperature setting use the (+) and (-) buttons.
The temperature will increase/decrease in 10ºC steps, the actual temperature readout will
appear in the LCD screen and will flash until it has reached the selected temperature.
This appliance is fitted with a key lock feature to prevent accidental setting changes during
use. To lock the keys press and hold the ‘-’ button until the (
) appears in the display.
To turn off the key lock repeat the lock procedure until the (
) disappear. To switch the
appliance OFF press and hold the (
) button for 2 seconds and unplug the appliance.
For first use it is recommended that you start with the lowest heat setting and gradually
increase temperature to find a suitable level. Only use as much heat as you need for
effective styling. Fine hair will require a low heat setting and thicker, less manageable hair
will usually require a medium-high heat setting.
|
ADVANCED PRO CERAMIC PLATES
Superior fine grade of ceramic
ensures a much smoother longer
lasting finish which allows you to
achieve outstanding results
every time.
|
COOL TIP
|
AUTOMATIC SHUT OFF
Automatically turns off after
30 minutes.
|
IONIC GENERATOR
Negative ions are emitted
along the plates to ensure
sleek, shiny hair.
|
FLOATING PLATES
For superior contact
with hair.
