Last update:
2016-06-03
11:41
ve.direct:ve.direct_to_bluetooth_smart_dongle http://www.victronenergy.com/live/ve.direct:ve.direct_to_bluetooth_smart_dongle
http://www.victronenergy.com/live/
Printed on 2016-06-03 15:54
Update dongle firmware
After connecting with a new VictronConnect version for the first time, it might be that the firmware of
the dongle needs to be updated. Be warned that this dongle firmware update can be a bit of a hassle:
all steps need to be patiently and accurately followed.
The update might need multiple steps: repeat the process untill the dongle entry disappears from the
list and the product connected to the dongle is listed instead.
There are small differences between the Android and iOS update process.
If you get stuck in any point of the update process just close and open the app again. That
should reset the update process to the last completed step.
Android
Follow these instructions
in this pdf
.
iOS
The dongle has to be paired before starting the update.
1.
After the first update step is completed go to the iPhone/iPad bluetooth settings and remove the
2.
dongle from the paired devices list. Then go back to the VictronConnect app and continue with the
second step.
Update sequence:
