Victron energy ASS030543020, Руководство пользователя

Страница: 15 / 15

13. FAQ
Q1: Will the device store data and send it out later when the gateway is in range?
No.
Q2: Can the firmware of the device be updated?
Yes, it will automatically update. It is not possible to do a manual update.
Q3: How can I connect multiple VE.Direct devices to the device?
You can connect up to two VE.Direct devices.
Q4: Can I connect both this module and something else to the VE.Direct port at the same time?
No.
Q5: Can the module be used to remotely switch the load output of an MPPT?
No.
Q6: Can the module be used to remotely update firmware of the BMV, MPPT, or Inverter?
No.
Q7: Can the module be used to remotely change the configuration of the BMV, MPPT or Inverter?
No.
Q8: Can the module be used to remotely perform any other action?
Yes, you can switch the onboard relay switch from VRM.
Q9: Is a GX Device like a Color Control GX or Venus GX required?
No, the data will be sent straight to the VRM portal.
Q10: The Peak Power Pack has a VE.Direct port, will the device work with that?
No.
Q11: Can I use my own SIM card in the device?
This is not officially supported. It might work, depending on if your operator supports a random APN setting and if has LTE-M (Cat
M1) support.
Q12: Can I use the SIM card for other devices?
No, the SIM card is locked, has a strict data limit, and will not work in other devices.
Q13: Can I factory reset the device?
No. You can however delete the corresponding installation in VRM, removing all historic data.
Q14: Does the device have GPS
No.
Q15: Can I use the device over WiFi?
No.
Q16: What happens after the 5th year? Do I have to buy a new device?
If 4G LTE-M networks are still operational you will be able to a) purchase an additional 5 years from Victron or b) insert your own
sim card.
Q17: Does the GlobalLink support NB-IoT networks?
No.
GlobalLink 520
Page 13 FAQ