Maintenance/ Proper Handling
Handling Vinyl Records
• Do not touch the record's grooves. Only handle records by the edges or the label with clean hands.
Touching the record surface will cause your record's quality to deteriorate.
• To clean a record, use a soft anti-static cloth to gently wipe the record surface.
• Keep records in their protective sleeves when not in use.
• Always store records upright on their edges
• Avoid placing records in direct sunlight, close to a heat source (radiators, stoves, etc.),
or in a location subject to vibration, excessive dust, heat, cold or moisture.
Gener
a
l Care
• When removing the power plug from the wall outlet, always pull directly on the plug.
Never pull the cord.
• To keep the laser pickup clean, do not touch it, and do not forget to close the disc tray.
• Do not attempt to clean the unit with chemical solvents as this might damage the finish.
• For cleaning, only use a clean, dry cloth.
•
In order to shut off the power to this product completely, unplug the power cord from the
wall outlet. Be sure to unplug the unit if you do not intend to use it for an extended period
of time.
How to Replace the Turntable Stylus
(ITNP-LC1)
The stylus should last about 50 hours under normal use. However,
ii is recommenced that the stylus be replaced
as
soon
as
you
notice a change in sound quality. Prolonged use of a worn-out
stylus may damage the reC-Ord. The highest speed of 78 RPM
records would wear out the stylus more quickly.
Removing the old stylus:
1. Set a screwdriver at the tip of the stylus and
push downward (A).
2. Remove the stylus by pulling it simultaneously downward
and forward.
Installing a new stylus:
1. Hold the front tip of the stylus and insert its rear edge (B) first.
2. Push the stylus upwards (C) until the tip locks into place.
Caution:
•
Do not bend the stylus.
•
Do not touch the needle to avoid injury your hand.
•
Turn off the unit's power before you replace the stylus.
•
Keep out of reach of children.
G
uido Pins
�
nsldo)
\
L
.,
\7
