Programmed Playback
Up to 20 tracks can be programmed to play in the desired order.
Notes:
- Programmed playback works with CD discs only.
1. Select “CD” mode, then load a CD.
9
2. While the CD is stopped, press the PROGRAM button.
3. “PROGRAM” indicator lights up and “01” blinks on the display.
4. Press (
or
) to select a track number.
5. Press the PROGRAM button again to set the next program track, “02” appears and blinks.
Repeat steps 4 thru 5 to program the additional tracks.
6. When the selection of track numbers has been finished, press the PLAY button (
) to start
program playback.
(
Note: When all 20 program tracks are set, you press PROGRAM button and “
FI
e
h
t
n
o
r
a
e
p
p
a
l
li
w
”
display)
7. To cancel the program mode, press the STOP ( ) till the program indicator won’t light.
To check the programmed order
In the stop mode, press (
or
) repeatedly to show the track numbers which have been
programmed.
To add a track to the end of the programmed order:
In the stop mode, press the PROGRAM button.
Select a track number by pressing (
or
), then press the PROGRAM button.
The current track will be added to the end of the program.
Listening to the FM Radio
1. Select “FM/
” mode.
2. Slide the slide switch on “FM”.
3. Tune to the desired station using the Radio Tuner Knob.
Note: In FM Mode, the “ST/BT” indicator lights up red when tuning in the stereo reception station.
Adjusting for Best Reception
FM broadcast: Extend and reposition the FM antenna.
Listening to an External Audio Device (AUX Mode)
In AUX (auxiliary) mode, this unit can play audio from an external audio source (iPod, MP3 Player,
Portable CD Player, etc.)
(not included) into the 3.5mm
Содержание VTA-204B
Страница 1: ...MODEL VTA 204B 7 IN 1 TURNTABLE...
