9
Listening to an External Audio Device (AUX Mode)
Press function selection button to select the “AUX” function.
In AUX mode, this unit can play audio from an external audio source (iPod, MP3 Player, Portable CD
Player, etc.)
There is an AUX jack on the rear side of the unit. When connecting a device that has an AUX-IN jack,
use the cable with 3.5mm plugs on either end with the rear AUX IN jack.
1. Plug one end of the
3.5mm
cable (not included) into the
AUX IN
jack.
2. Plug the other end of the cable into the headphone jack of the external audio source.
NOTE:
All operations are only available on your external device.
Bluetooth Streaming
This unit has the ability to receive Bluetooth audio from an external device like a smartphone, laptop,
etc. This unit also has the ability to stream Vinyl and other functions directly to an external Bluetooth
speaker or headphone of your choice. See the sections below for instruction.
BLUETOOTH RECEIVER
1. Press function selection button to select “BLUE” function.
2. The Bluetooth indicator will flash.
3. Set the Bluetooth function of your external device when the apparatus is on.
4. Set to search Bluetooth device on your external device.
NOTE:
The effective distanc
e between your external device and this apparatus is 10 meters.
5. When “
Victrola Ellington
” appears on the paired devices list on your external device,
press “
Victrola Ellington
” to connect.
If a password is required, use “0000” then press “OK” on your external device.
6. When your Bluetooth connection is successful, Bluetooth LED indicator will remain lit.
NOTE:
The Fast Forward/Rewind function is only available on your external device.
7. Now you can stream music from your smartphone or other Bluetooth device.
BLUETOOTH TRANSMITTING FUNCTION
1. FM/CD/AUX/PHONO modes have a Bluetooth transmitting function.
2. Select the mode (FM/CD/AUX/PHONO) you wish to stream to an external Bluetooth device.
3. Locate and turn ON an external Bluetooth speaker (not included) or headphone (not included).
Make sure it is in pairing mode.
4. Press and hold the pair button (on the Ellington) to activate the Bluetooth transmitting
function, the Bluetooth indicator will flash. When the Bluetooth connection is successful, the
Bluetooth LED indicator will remain lit.
- Press and hold the pair button again to cancel the Bluetooth transmitting function,
the Bluetooth LED indicator will turn off.
5. Now you can stream audio from the Ellington to an external Bluetooth device.
NOTE:
-
When the Bluetooth speaker is connected, the Ellington will have no sound.
Once connection is disconnected, the sound of the host speaker will activate again automatically
.
-Place the Bluetooth device within 1m (3.3') of the product to perform pairing correctly.
-The product stays in the pairing mode for about 30 seconds. If pairing is not properly
completed, follow the above steps again from the beginning after turning all devices OFF.
