Insert batteries.
Two AAA batteries (not included). Push
➃
➃
the battery cover to the left
and take the cover off. Insert two new batteries in the order shown in
diagram 1. A signal will sound to confirm that the batteries have been
correctly inserted. If you do not hear a signal, remove the batteries and
insert them again. Fasten the battery door in the lower track and push
the door to the right until you hear a click.
Change the batteries
when the figures on the display are no longer
bright or if the alarm signal becomes weak. The clock and the alarm
times must be reset when the batteries have been removed.
Remove the protective film from the display.
Description.
➀
➀
CLOCK, alarm = A1, A2, A3, A4 and LOCK
➁
➁
Program button
➂
➂
Protective cover
➃
➃
Battery door
➄
➄
ON/OFF button = Confirms that the alarm is activated or shut off
➅
➅
SELECT = Chose the alarm signal (green button)
➆
➆
12 AM/PM or a 24 hour day
➇
➇
HR = Hour
➈
➈
MIN = Minute
➉
➉
ALARM/STOP = Turn off alarm signal
Setting the clock.
Open
➂
➂
the protective cover from the top.
1. Move
➁
➁
the program button until CLOCK is shown in
➀
➀
, the digits
are blinking.
2. The CLOCK is pre-programmed for AM/PM 12:00. Push
➆
➆
12/24
in order to change the clock to 0:00 for a 24-hour day.
3. To set the current time, push
➇
➇
HR=hour and
➈
➈
MIN = minute.
You can change the time on the clock whenever you want to do so.
Setting the alarm.
Alarm 1 = early morning, 2 = morning, 3 = afternoon, 4 = evening.
1. Move
➁
➁
program button until A1 is shown in
➀
➀
, and 0:00 blinks
for a 24 hour day or 12:00 for AM/PM (English/American time).
2. Push
➇
➇
HR = hour and
➈
➈
MIN = minute and set the first alarm.
The clock and digit 1 will blink. Push
➄
➄
ALARM ON/OFF, which
confirms that the alarm is set. The alarm symbol is shown on the
right side of he display. The symbol confirms that the alarm is
activated.
3. Move
➁
➁
the programming button to A2, which is shown in
➀
➀
to
set the next alarm time. Push HR and MIN, the clock and digit 2
will blink. Confirm that the alarm is set before you set the next
alarm. Repeat the setting procedure for A3 and A4. Moving
➁
➁
the program button to LOCK, as shown in diagram
➀
➀
, locks the
settings. The alarm times can be changed whenever you want to
do so.
➊
Alarm symbol
➋
Clock
➌
Digits of confirmed alarms per
day. The digit that is missing under the clock is not set or confirmed.
The confirmed alarm rings every day at the same time.
The program
button must be on LOCK whenever you use the pillbox.
The alarm symbols:
➊
Beeping alarm
➋
Voice alarm
➌
Visual alarm.
Only one signal can be activated for all alarm times. Push the green
button
➅
➅
SELECT, choose the signal and close
➂
➂
the protective cover.
The signal can be changed at any time except when the alarm is alert.
Checking the alarm settings.
Move
➁
➁
the programming button to A1, which shows a blinking alarm
time, 1 and alarm symbol. If the alarm symbol is not shown, then the
alarm is not activated. Push
➄
➄
ALARM ON/OFF and the alarm symbol
will be shown in the display. Continue checking A2 etc. To finish move
the program button to LOCK. The alarm can be set for summer
time or winter time, or as a reminder to take an injection, liquid or
powdered medicine or a suppository. It can also be used a regular
alarm clock, to wake you up.
How does the alarm work?
The alarm goes off at the set time. Push
➉
➉
ALARM/STOP to shut
off the alarm. If you do not shut it off it will ring, as a reminder, up
to three times with one-minute intervals.
What happens if you miss the alarm?
If you miss an alarm time one or more of the pill numbers is crossed
over and MISSED PILL blinks. The digit shows which dosage time
has been missed. When you push
➉
➉
ALARM/STOP the MISSED
PILL text disappears from the display. The crossed-over digit
disappears automatically after 23 hours.
Why doesn't the alarm ring at the set time?
1. The number that is missing under the clock is not set or confirmed.
Open
➂
➂
the protective cover, move
➁
➁
the programming button to
the digits that is missing under the clock (1=A1, 2=A2, 3=A3, 4=A4).
Push
➄
➄
ALARM ON/OFF, and the alarm symbol confirming that the
alarm is activated will be shown in the display. Repeat the setting
for the other digits that are missing under the clock. To finish, move
the program button to LOCK. The set and confirmed times with
digits will be shown under the clock.
2. If the digits blink in the display, move
➁
➁
the program button to
LOCK as shown in
➀
➀
.
Notes on the pillbox.
Adhesive stickers are included. You can write notes about the name,
the medicine, the days, etc. and fasten the stickers on the pillbox.
Adjust the size of the dosage compartment.
If the compartment is too small, push out the upper edge A with your
thumb and lift out the divider B. To put divider B back, place it in the
track inside the pillbox. Push down divider B until it clicks.