5 |
P a g e
REAR PANEL
Voltage Selector
This slide-switch selects the correct mains voltage for your territory. Please ensure
this is set to the correct position for the available mains power. If you do find
yourself in a strange town where the mains voltage is different to home, (and
you’
ve got blisters on your feet), it will be necessary to switch this selector. The
mains fuse must always be changed at the same time. Failure to do this will result
in either the mains fuse blowing as soon as the amp is turned on or the amp
running with a fuse that is of too higher value to provide adequate safety
protection. Generally, the fuse value will double if the mains voltage is halved, (i.e.
if it’s a
1A fuse in the UK @ 230V, it will need to be a 2A fuse for the USA @ 115V).
Always use the correct rating and type of fuse. Victory amplifiers exclusively use UL-
approved 20x5mm glass ‘T’ or ‘Timed’ fuses. If you have difficulty acquiring the
correct fuses, please contact Victory using
Mains Inlet, (IEC Socket) & Mains Fuse
Please use the correct mains cord for the country you are in whether this is your
home territory or abroad. Ensure the amp is switched to the OFF
or ‘0’
position on
the rear switch and to PREHEAT using the front toggle switch before plugging the
mains lead in this socket.
The mains fuse is located in a small tray between the inlet & mains switch and can
be removed using a small flat blade screwdriver. Please note where this fuse is