Victory V30 The Countess, Руководство пользователя

Страница: 3 / 8

FRONT PANEL
Input
Plug your guitar in here!
Clean Gain
This adjusts the input sensitivity. Use low settings for maximum clean headroom and higher settings
when you want to introduce more natural valve overdrive to your tone.
Balancing your input gain level with your master volume level is crucial in delivering the tone and feel
that works best for you.
Channel switch
The V30 has two channels that you can switch between using this front-panel toggle, or a remote single
way latching footswitch (supplied) plugged into the Channel footswitch socket on the rear.
Overdrive Gain
Exactly the same as the clean channel, this controls the input gain… except here there’s a whole load
more of it! Run it lower for crunchy sounds, in the mid-range for thicker overdrive, and crank it up for
the fullest distortion.
Bass
The V30 has a shared EQ section for both channels. The Bass controls the low frequency content of your
sound. Higher levels of bass can be good at low volumes, but take care when running the amp louder –
you may find you need to reduce the bass control. As with all the EQ pots, adjust to taste!
Middle
Controls the midrange frequencies in your sound. Run the middle control higher to help cut through a
band mix, or generally fatten and ‘widen’ your sound. Run it lower for a lighter, less ‘in-your-face’ kind
of sound.
Treble
Controls the high frequency content of your sound and is also a powerful tone shaper when it comes to
overdrive character.
Clean Master
Each channel has its own Master Volume control. Use this one to balance the volume level of the clean
channel to taste when switching between channels and modes.
Overdrive Master
Each channel has its own volume control. Use this one to balance the volume level of the overdrive
channel to taste when switching between channels and modes.