Victory EMHD Series Скачать руководство пользователя

Страница: 13 / 57

Operator

’s Manual Victory EMHD Series

- Page 13 of 57 -

Version 2.0

4.3

Personal Protective Equipment

While handling, assembling and maintaining the heavy duty flail mower, adhering to all
recommended safety instructions and ensuring that the correct Personal Protective Equipment
(PPE) is used.

Always wear:

◼

Safety helmet; for head protection and prevention from falling objects.

◼

Safety gloves; for hand protection and prevention of cuts from sharp edges.

◼

Steel tipped safety boots; for foot protection from falling objects.

◼

Wrap-around safety glasses for eye protection and prevent damage caused by shooting
particles.

◼

Safety vest for recognizable presence, visibility and safety.

◼

Any other Personal Protection Equipment that might be required, specified or dictated by the
working environment.

◼

Your Company can prescribe additional (safety) instructions. This Manual does not describe
how to comply with this.

4.4

General Safety Rules for Machines

◼

Incorrect practice or lack of care can cause burns, wounds, mutilation, suffocation, other bodily
injuries, or death.

◼

Ensure the work area around the equipment is smooth, clean and free from any obstacles.
Keep in mind that a dangerous situation can always arise.

◼

Always wear safety glasses and protective shoes when carrying out the operation.

◼

Long hair is not allowed. Never wear loose or torn clothing. Permanently remove jewelry.

◼

When lifting heavy parts, use a hoist or ask for help, to prevent personal injury.

◼

Ensure that all hoisting equipment such as lifting straps, hooks, or ropes are in a good state of
repair and that they can safely bear the

equipment’s

weight.

◼

Never bypass door interlocks or safety sensors and switches.

◼

Leaking chemicals, oil, or water on electrical equipment can result in severe damage or fire.

◼

Watch out for hot parts on switched-off components and hot liquids in lines, pipes, and
compartments to prevent burns.

◼

Never open any vent or drain valve or remove any plugs while the system is under pressure.

◼

Ensure that oil pumps are isolated from the system and relieve the pressure before
disassembling a pump, removing plugs, or disconnecting piping.

◼

Always use tools that are in a good state of repair. Ensure that you know how to use the tools
before carrying out any work.

◼

ONLY use replacement parts from the same brand as the relevant part.

Содержание EMHD Series


























































Результаты поиска

Содержание EMHD Series

Отзывы:

Похожие инструкции для EMHD Series

Бренды по названию

Популярные бренды

Victory EMHD Series, Руководство оператора

Результаты поиска

Содержание EMHD Series

Отзывы:

Похожие инструкции для EMHD Series

Бренды по названию

Популярные бренды