Victory BXH-5x10, Руководство пользователя

Страница: 18 / 29

15. Do not place metal, bottles, cans, rocks, glass or
other solid material into the wood chipper. If
something like this gets into the machine, stop the
machine immediately for a detailed inspection. Stop
engine, remove ignition key and place in your pocket
and wait for all moving parts to stop before inspecting
or unplugging. Inspect machine for damaged or
loosened parts before resuming work.
16. Blades:
There are 2 types of blades used on the Wood
Chipper. They work together to cut, shear and shred the
wood as it moves through the machine.
a. Rotor blades:
The rotor is equipped with 4 blades placed at 90° to
each other to keep the rotor in balance. If one needs to
be changed, the one opposite should be changed.
b. Stationary blade:
Each machine is equipped with a stationary blade
that acts as a stop for the moving rotor blades.
Machine is shown with guard opened or rotor
cover opened for illustrative purposes only.
Do not operate machine with guard opened or
cover opened.
17. Clearance:
It is recommended that the clearance between the
rotor and stationary blades be set and maintained at
1/32 inch to obtain the best performance.
Use the stationary blade mounting bolts to set the
clearance as required.
Each machine is equipped with a twig breaker to
break up twigs or other long material as it moves
through the rotor compartment. Open the rotor cover
and check the condition of the breaker on a weekly
basis. Also check for any entangled material when the
rotor cover is opened. Remove this material prior to
closing the cover and resuming work.
Machine is shown with guard opened or rotor cover
opened for illustrative purposes only.
Do not operate machine with guard opened or cover
opened.
Disassembled Double Mounting