Victory 2002 V92TC, Руководство пользователя

Страница: 98 / 166

Maintenance
84
Inspect Swing Arm and Rear Axle
1. Remove the swing arm pivot covers and tighten the swing arm pivot nut.
Torque: 85 ft--lbs (115 Nm)
2. Reinstall the pivot nut covers.
3. Sit in the operator’s seat and slowly bounce the rear suspension a few. Make sure the suspension
moves freely without binding.
4. Elevate the rear of the motorcycle until the rear wheel is off of the ground. Use an appropriate
motorcycle lift or a block of wood or steel placed securely under the frame.
5. Grasp the rear tire and attempt to move the rear wheel side--to--side.
If there is movement at the rear axle, inspect the wheel bearings and rear axle (see the Victory Service
Manual
or an authorized Victory dealer).
If there is movement at the front of the swing arm, check the swing arm pivot nut torque. If
movement is still present, inspect the swing arm pivot bushings (see the Victory Service Manual or an
authorized Victory dealer).
6. With the transmission in neutral, slowly rotate the rear wheel. If the wheel does not rotate smoothly,
inspect the wheel bearings, rear brake rotor and caliper, and rear axle (see the Victory Service Manual
or an authorized Victory dealer).