Victory Spa Portable SPA Classic, Руководство по эксплуатации

Страница: 17 / 28

17
2.5. Water functions.
Portable SPA system is equipped with water functions like water massage, air massage
and filtration. Water function setting is displayed in a water part of the screen when water
massage, air massage or water heating is being activated.
Figure 14. Water function setting.
Current water temperature in the bath is displayed in Water temperature field. This field is
only for information.
In the ambient temperature shows the current temperature of the ambient air baths This field
is only for information.
During water heating, water will be heated to temperature shown in
Set water temperature
field. Temperature can be set within 5°C ÷ 40°C.
Timer field shows minutes left to turn off water functions. Time can be set within 1min. ÷
99min..
Air massage intensity field shows a currently set air massage level, which can be set within
5%÷100%.
Pushing in the
button for 1 second minimum activates its autorepetition. Thus a value can be
changed quickly.
It is possible to start water functions only when there is a suitable
water level in the bath. Too
low water level is signalled by a message displayed in a water function part of the screen in a
working mode.
If the water level drops below the suitable water level while water function
operation, water functions will be automatically turned off.
Figure 15. Low water level message.
Particular water functions are presented in detail in further part of the instruction.
Message on
too low water
level
Water
temperature
Set water
temperature
Timer
Air massage
intensity
Ambient
temperature