Victory 4x4 ADVENTURE BED RACK, Инструкция по установке

Страница: 4 / 9

1.
ASSEMBLY
2.
If you do not have the trail rail system, you will need to clamp the legs
to the side of the bed. For this method, we recommend putting the rack
together before putting the legs on the bed of the vehicle. Only do this if
you can get help lifting it into place after it is assembled. If you are putting
the rack together alone, attach the legs to the bed first. See step 6 on page
8 for more instructions on this.
How you begin the install depends on whether or not you have a trail rail
system in the bed of your vehicle. If you do, insert a provided 5/16”-18 x
1-1/2” carriage bolt through each hole in the small rectangular spacer and
slide that into the trail rail. Do that 3 more times, then you can mount the
legs of the bed rack using the 5/16”-18 locking flange nuts. Leave these
somewhat loose for now so you can adjust the width in order to fit the side
crossbars in step 4.