Bluetooth Speaker
BS-207N
NFC User Manual
Before used
Charging the Battery as follows:
1.
The attached USB Cable a type side connected in to the PC USB connector and the Micro USB
plug side connected in to the Bluetooth Speaker.
2.
The Red LED will light on during charging.
3.
When charging completed the Red LED go off.
Power On and Power Off the Bluetooth Speaker
1.
Press the
button for 3 second. An alert tone will “Di” once and the Blue LED will blink
in sequence. (1 second on 1 second off)
2.
Press the
button for 3 second. An alert tone will “Di” twice and the Red LED will flash
twice and then go off.
Pairing the Bluetooth Speaker with a Mobile Phone
Make sure your mobile phone is Bluetooth-enabled. Specific pairing steps may vary with different
cell phones. Refer to the User Guide for your mobile phone for further information.
The general pairing steps are as follows:
1.
Keep the Bluetooth Speaker close to your mobile phone.
2.
Press and hold the button about 8 seconds during power off mode, the alert tone will “Du”
and the Red and Blue LED will fast blink alternately. The Bluetooth Speaker is under pairing
mode at the moment.
3.
Search the Bluetooth Device under the pairing mode in the mobile phone.
4.
Once the search is completed, the “BT Speaker” will show in the Bluetooth device list.
5.
Selected the “BT Speaker” to connect and entering the matching code with “
0000
”.
6.
The pairing will completed at the moment and the Blue LED of the Bluetooth Speaker will
blink in sequence.
Notes:
If pairing is not successful, Switch Off the Bluetooth Speaker and then redo the pairing
procedure again.
If pairing is successful, the paired devices will remember each other. Unless the pairing information
is deleted because of a new pairing, there is no need to go through the pairing procedure again
when using the same devices the next time.
NFC pairing
If your mobile phone with NFC function, you can pairing the BT speaker with your NFC function.
the operation as below:
1, Make sure your mobile phone is NFC-enabled
2, Touch the mobile phone NFC magnetic induction position to the BT speaker NFC position, then
paired BT speaker automatically. If it is first times to pairing this BT Speaker with your mobile
