Assembly & Use Instructions
Please read all previous portions of the manual before assembling
your Cherry Pitter.
1.
Insert the shaft into the underneath side of the Cherry Pitter and
push it up as far as it will go (see Diagram 1, below).
2.
Slide the spring over the shaft. Then screw the knob onto the top
of the shaft (see Diagram 2, below).
3.
Connect top of cherry tray to suction base by inserting wide part
of cherry tray into the suction base followed by the other side. Push firmly
until both sides click in place (see Diagram 3, below).
4.
Place the Cherry Pittter on a smooth surface and turn the suction
lever to secure the base (see Diagram 4 below).
5.
Insert the gasket into the slot on the side of the body and slide the
tabs of the pit container into the slots on the underneath side of the Cherry
Pitter (see Diagram 5, below).
6.
Place stemmed cherries in the tray. They will automatically funnel
through as you press down quickly on the knob, ejecting the pits into the pit
container. The pitted cherries will roll out of the Cherry Pitter, so be sure
to have a bowl in place (see Diagram 6 below).
1
4
2
5
3
6
3
