5
Hopper Assembly
Assemble the hopper by lining up the sides and firmly pressing them
together, until both sides are fully touching and no gaps remain. After
correct assembly, the hopper should fit snugly on the top of the Grain Mill.
If the hopper doesn’t fit correctly then the halves have not been pressed
together far enough.
Grain Mill Assembly Instructions
For proper assembly, please follow ALL instructions below:
1. With your Grain Mill now clamped correctly to a sturdy surface, insert
the milling cone shaft through the front of the Grain Mill body (see
diagram 1).
2. Screw the adjustment knob onto the threads on the front of the Grain
Mill body, just until it is snug (see diagram 2).
Do not over-tighten.
3. Push the handle into the shaft on the back of the Grain Mill, by lining
up the tabs on the handle with the grooves in the shaft (see diagram 3).
1
3
2
