Victorinox NIGHT VISION, Быстрое руководство

Страница: 3 / 12

H
E
I II III
F
B
A
G
LIGHTING FUNCTIONS
SETTING THE TIME AND DATE
D
C
LIGHTING FUNCTIONS (fig. 1)
Pusher:
E. Pusher
Lighting indications:
F. Blue LED light
G. White LED light
H. Red LED locator beacon
1. Dial illumination Mode: One quick
push of the pusher ( E ) activates the
soft blue LED light (
F
) for 6 seconds.
To deactivate, press the pusher ( E )
once.
2. Extended Light Mode: Two quick
pushes of the pusher (
E
) activate the
white LED light ( G ).
3. Signal Mode: Three pushes of the
pusher ( E ) will cause the white LED
light to flash at 150 pulses/min. for
2 minutes.
Note: To deactivate Mode 2 / 3 prior to
2 minutes, press the pusher ( E ) once.
4. SOS Signal Mode: Holding the
pusher ( E ) for 5 seconds will activate
an intensified SOS light signal.
To deactivate, press the pusher ( E )
for 5 seconds.
5. Locator Mode: Red LED locator
beacon (
H
) blinks once every 10
seconds. Five pushes of the pusher
( E ) will deactivate the Locator
Mode. Five pushes of the pusher will
activate it again.
6.
Battery End-of-Life Mode (EOL):
Red
LED locator beacon ( H ) will flash 3
times every 10 seconds indicating the
lighting batteries should be changed.
SETTING THE TIME AND DATE (fig. 2)
Timepiece indications:
A. Hours
B. Minutes
C. Seconds
D. Date
1. Pull out the crown to position III .
The seconds hand ( C ) will stop.
2. Turn the crown to the desired time.
Remember the date advances at
12:00 midnight, not 12:00 noon.
3. Push the crown back to position I .
4. Pull out the crown to position
II
(the watch continues to run).
5. Turn the crown clockwise to the
desired date.
6. Push the crown back into position
I
.
Note: To avoid any damage to the
movement, do not perform the DATE
SETTING between 9:00 p.m. and
3:00 a.m. when the date mechanism
is in action.
Fig. 2
Fig. 1