Page 7 of 8
Qd-00029.doc
Version 12.06.07
Setting Countdown
Press the Victorinox emblem for
2
seconds until
a beep tone is heard and the display flashes.
Release the Victorinox emblem again. You have
now changed to the countdown setting mode.
The arrow indicates the present setting direction.
The changeover takes place automatically.
When the Victorinox emblem is pressed briefly,
the display is adjusted by 1 digit in the direction
of the arrow.
If the Victorinox emblem is pressed for longer
than this (min.
6
seconds), the adjustment speed
is increased (20 digits/s).
If the button is not pressed for
10
seconds, the
setting mode is quit automatically and the time
begins to run.
Switching the Countdown-Alarm off
The alarm can be switched off by pressing the
Victorinox emblem briefly.
Restart Countdown
The countdown can be started with the value set
previously. Press the Victorinox emblem for
2
seconds until a beep tone is heard and the
display flashes. The countdown jumps to the
value set last. After
10
seconds, the countdown
is started with this value.
Reset Countdown
When the Victorinox emblem is pressed for
8
seconds, the most recently set value changes
to 0 (Reset). If the button is not pressed within
10
seconds, the adjusting mode is quit automati-
cally.
Setting walking/travel time (Timer)
Start timer
Press the Victorinox emblem for
2
seconds and
the timer is started with a beep tone.
Stop timer
Press the Victorinox emblem again for
2
seconds
and the timer is stopped with a beep tone. The
value is maintained and can be restarted after a
pause in the walk (
2
seconds).
Reset timer
Press the Victorinox emblem for
4
seconds. The
timer is started first and then set to 0 (Reset).
This is confirmed in each case by a beep tone.
