VictoriaPlum CNC1001, Быстрый старт

Страница: 9 / 12

•
Water is constantly running into the pan
1. Gain access to the cistern and check if the problem is the inlet valve or flushing valve
2. Lift the inlet valve adjusting screw up (this will act as if the inlet valve is in shut off mode)
3. If water is still coming into the cistern then the problem is the inlet valve.
Solutions and how to fix problem(images on next page)
1- Turn water off at isolation valve (most important)
2- Remove blue cap with small screw driver
3-Turn adjusting screw until cup drops to bottom
4- Turn white top anti clockwise and lift the cap and adjusting arm out
5- Remove the small white cap – rubber diaphragm – rubber washer and clean with warm water make sure all
debris is removed.
6- Place the white cap back and turn clockwise and lock in place
7- Lift the cup up and make sure the float is flat in cup and screw back up make sure the cup level is set at 6 litre
waterline
8- Put the blue cap back on and turn water supply
9- Check the inlet valve is working correctly and shutting off
Trouble shooting the Inlet Valve