Victoria Vittoria B, Инструкция по эксплуатации

Страница: 22 / 28

Victoria-05 Ltd.
22
Yes, to updated combustion air. Fume extractor pulls air from the room to the combustion chamber.
What settings does the control panel of pellet stove need?
Setting the desired room temperature and the temperature of the liquid into the heating system. Pellet stove will
regulate their power to that temperature. The installer must make the appropriate setting.
How often should you clean the combustion chamber?
Before each ignition of the pellet stove, but only when it is turned off and cold.
After cleaning the pipes of the integral boiler.
May you clean the pellet fuel hopper with a vacuum cleaner?
Yes, at least once a month or if the pellet stove has not worked for a long time.
Can you use other types of fuel than wood pellets?
NO. Pellet stove is designed to work with wood pellets with a diameter of Ø 6 mm. The use of another type of fuel leads
to damage.
SPARE PARTS CATALOGUE
№ Denomination № Denomination
1 Gear motor for auger 17 Fire-door (set)
2 Fume extractor ST25, aluminum volute Ø150, encoder (set) 18 Ashtray
3 Auger (set) 19 Grill for hopper
4 Closed expansion vessel 20 Left side plate (set)
5 Ignition 21 Right side plate (set)
6 Thermostat 22 Side colored panel
7 Electronic control system (set) 23 Display box (set)
8 Control panel 24 Fume thermocouple
9 Circulation pump 25 Thermostat of the pellet fuel hopper (75°C)
10 Glass 4 x 340 x 339-0.5, R805 26 Sensor for temperature of hot water
11 Glass sealing (set) 27 Power switch with fuse
12 Combustion chamber (set) 28 Power cable
13 Fire-grate (for combustion chamber) 29 Cable for control panel
14 Deflector (top) 30 Cable for fume extractor
15 Handle (set) 31
Power cables for circulation pump, auger and thermal
protections (set)
16 Glass handle