www.victorruoshui.co.kr
이 자료는 저작권법에 따라 보호받는 저작물이므로 무단배포 및 무단복제를 금하며, 내용의 전부 또는 일부를 이용하려면,
반드시 한국 VictorRuoshui 社 의 서면동의를 받아야 합니다.
point.
6. Do not input DCV 36V and ACV 25V between
current input terminal and “COM” terminal .
4-6
．
Resistance measurement
4-6-1. Apply the black test lead to “COM” terminal
，
and
the red one to “V/Ω/Hz” terminal.
4-6-2. Set the range knob to a proper resistance range,
connect up the test leads across the resistance
under measured.
NOTE:
1. If the resistance value is over the selected range value,
"OL" displays, thus, should set to a higher range.
When measuring value is over 1MΩ
，
the reading
needs a few seconds to be stable. It's normal for high
