Victor Mist Pro 360, Инструкция по эксплуатации

Страница: 7 / 12

Important Information - READ BEFORE USE
Troubleshooting guide
Problem Cause Solution
No power to the unit
Mist is not satisfactory.
Not dispensing solution
No mist / only air being released
Switch not pressed.
Plug not inserted.
Power cut.
Nozzle or fluid line clogged.
Pump or motor not switched on.
Nozzle clogged.
Pump or motor not switched on.
Switch not pressed.
Press the switch.
Insert the plug into the socket.
Check the power Cable connection.
Check and clean the flexible hose and
the misting nozzle.
Check both switches are on.
Clean nozzle.
Clean misting filter
Check both switches are on.
Press the switch.
This instruction manual forms an integral part of the Mist Pro
360 and must be read before use.
All operators of the Mist Pro 360 device should be suitably
instructed before use.
Before use, routine observations and maintenance should be
executed to ensure safe operation. - Failure to carry out
periodical maintenance could cause the equipment to become
unsafe. The manufacturer can accept no responsibility in this
event.
Maintenance and the replacement of parts should only be
carried out by a fully qualified technician.
Please ensure the machine is fully switched off and
disconnected from any power source during routine
maintenance, replacing parts or cleaning of the machine.
Any fluid expelled from the machine may be unsafe due to a
number of factors, including, but not limited to temperature,
pressure or chemical content.
This machine is only intended for applying mist to inanimate
objects. Avoid contact with face, eyes and skin.
Appropriate PPE should be worn whilst operating this
machine.
The Mist Pro 360 is designed for professional use only and
should be kept away from children or untrained persons or
those with limited experience at all times.
When operating any electrical equipment, suitable care and
attention should be given whilst in use.
This machine has been designed for, and is intended for use in
commercial environments only.
The Mist Pro 360 is intended for indoor use only.
The Mist Pro 360 should be stored indoors and never exposed
to extreme temperatures for prolonged periods of time.
- Do not remove plug from wall socket by pulling power cable.
- Do not immerse.
- The use of pressure washers or steam cleaners to clean this
machine is prohibited.
- Intended for indoor use only
- Do not use this machine in the rain.
- Ensure power supply is disconnected from power before
commencing any maintenance or cleaning of the machine.
- The power lead should be unwound from the storage hook
fully before use.
- Ensure filters are kept clean.
- Ensure machine is kept clean. This includes Nozzles and
Hoses.
- Ensure the machine is inspected for damage before and after
use. If visible damage occurs, it should be repaired by a
qualified person.
- Ensure the power cable is inspected for damage before and
after using this machine. If visible damage occurs, it should be
replaced by a qualified person.
- Only use Victor approved parts, hoses and nozzles.
- Ensure the fluid tank is empty before inspecting underneath
the machine.
- Ensure the Mist Pro 360 motor housing is connected to the
drum by both clips on the side before moving.
Use handle provided for moving the machine.
- Only use the hose to move the Mist Pro 360 whilst on
smooth, even surfaces.
- Consider the weight if the machine before lifting.