1
V
GENERAL PURPOSE
HOTCUPBOARDS & BAINS MARIE
MODEL NUMBERS
HC20MSY
HC30MSY HC40MSY HC20MSGY
HC30MSGY
HC40MSGY
BM20MSY BM30MSY BM40MSY BM20MSGY
BM30MSGY
BM40MSGY
BM22MS BM32MS BM22MSG
BM32MSG
HC31MS HC21MS
BM21MS
Thank you for buying a Victor Unit. We hope and expect that you will get many years of
satisfactory use from your purchase.
In order to achieve the best results from your equipment please read, and follow, the
installation, operating, cleaning and maintenance instructions below. Failure to follow
them may affect the warranty.
1.
UNPACKING AND ASSEMBLY
All protective coating used on stainless steel surfaces of the hot cupboard must be
removed. The exposed surfaces can then be wiped clean with a damp cloth, using a
mild detergent or soap if necessary.
DO NOT USE ANY ABRASIVE MATERIAL OR FORM OF BLEACH FOR CLEANING PURPOSES.
Please see cleaning section of this manual.
MOBILE MODELS: Four Castors are fitted, two of which are braked
STATIC MODELS:
Position the unit where it is to be used and ensure that it is level. This is
done by adjusting the feet, turning clockwise to raise the unit and
anticlockwise to lower the unit.
2. INSTALLATION
Where the appliance is to be positioned in close proximity to a wall, partition, kitchen
furniture, decorative finishes, etc., it is recommended that they be made of a non
combustible material or clad in a suitable non-combustible heat insulating material and
that the closest attention be paid to fire preventative regulations.
