1L Electric Water Sprayer
K257
Instructions for Use
Please read and retain these instructions for future reference
v001: 30/07/21
Operation
1.
Open the bottle body as shown, add the
required amount of water. Do not overfill. Then
tighten.
2.
The sprayer will continue working after the
switch has been pressed. Press the switch again
to turn off.
3.
The nozzle can be adjusted to a jet or mist
mode depending on your requirements.
After each use
•
Pour out the residue in the bottle and rinse
with clean water.
•
Unscrew the nozzle and rinse the residual
impurities with water.
•
Pull out the water filter and rinse.
•
Warning: Keep motor switch and electrical lines
away from water.
Power connection:
Insert the USB receiver into the energizing port and plug the other end into the power port.
This product is suitable for general USB interface line, which can be connected to mobile power supply,
computer, ordinary and vehicle-mounted power supply, etc.
DISPOSAL
•
Coopers of Stortford use recyclable or recycled packaging where possible.
