Deluxe
Metal Detector
H672
Instructions for Use
Please read and retain these instructions for future reference
v001: 26/03/21
When the detector detects a ferrous metal, sound becomes lower or even disappears. Meanwhile the meter
pointer moves to left. When the detector finds a non-ferrous metal, it makes louder sound and the meter
pointer goes to right.
If the detector does not detect the material, check the battery power and verify that the battery is properly
connected.
Note:
⚫
If you are using a coin, the detector detects it more easily if you hold it so a flat side is parallel with the
flat side of the search coil (not the edge).
Outdoor Testing and Use
1.
Find an area on the ground outside where there is no metal.
2.
Place a sample of the material you want the detector to find (such as a gold ring or a coin) on the ground.
(If you are using valuable metal such as gold to test the detector, mark the area where you placed the item,
to help you find it later. Do not place it in tall grass or weeds.)
3.
Rotate
VOLUME
about two-thirds clockwise. Set DISCRIMINATION to its midpoint.
4.
Press and release the RED button on the handle until the pointer is at or near 0. Then release the RED
button.
5.
While holding the search coil level and about 1-2 inches above the ground, slowly move the search coil over
the area where you placed the sample, sweeping the search coil in a side-to-side motion.
Search Coil Sweeping Hints:
⚫
Never sweep the search coil as if it were a pendulum. Raising the search coil while sweeping or at the end of
a sweep causes false readings.
