
Rechargeable 60 LED Light
H664
Instructions for Use
Please read and retain these instructions for future reference
v001: 24/03/21
•
DO NOT INSERT UNIT OR ITS PARTS IN WATER OR ANY LIQUIDS. DO NOT CHARGE BATTERY IF IT IS
WET OR SHOWS SIGNS OF CORROSION
•
DO NOT CHARGE THE UNIT OUTDOORS. ALWAYS STORE THE UNIT INDOORS.
•
DO NOT OPERATE IN THE PRESENCE OF EXPLOSIVES AND/OR OTHER FLAMMABLE FUMES OR
LIQUIDS.
•
DO NOT TURN THE UNIT ON DURING CHARGING.
•
THIS APPLIANCE IS ONLY FOR HOUSEHOLD USE, NOT FOR COMMERCIAL OR INDUSTRIAL USE.
•
THIS APPLIANCE IS NOT INTENDED FOR USE BY PERSONS(INCLUDING CHILDREN) WITH REDUCED
PHYSICAL, SENSORY OR MENTAL CAPABILITIES, OR LACK OF EXPERIENCE AND KNOWLEDGE,
UNLESS THEY HAVE BEEN GIVEN SUPERVISION OR INSTRUCTION CONCERNING USE OF THE
APPLIANCE BY A PERSON RESPONSIBLE FOR THEIR SAFETY.
•
CHILDREN SHOULD BE SUPERVISED TO ENSURE THAT THEY DO NOT PLAY WITH THE APPLIANCE.
•
IF THE SUPPLY CORD IS DAMAGED, IT MUST BE REPLACED BY THE MANUFACTURER, ITS SERVICE
AGENT OR SIMILARLY QUALIFIED PERSON IN ORDER TO AVOID A HAZARD.
Features:
•
The emergency lights has built-in long life and rechargeable 18650 Li-ion batteries of high capacity as
2x1200mAH
•
The battery can be charged and discharged more than 500 times.
•
SMD chip is in advantages of energy-saving, high light, long life and high power.
•
Both high light and dim light for choices
Instruction:
•
Please use the USB cord line connect the light USB port and the USB charger. The USB charger (not
included) should be 5V 500mAH or 5V 1A.
•
Push the switch up, Low light will be ON, then push the switch up again, high light will be ON, push the
switch down 2 steps, the light will be OFF. When you need use USB to recharge or charge to the phone,
please push the switch to the bottom.
•
The charging indicator will light up in red to show it is being charged.
•
Before using the unit for the first time. It should be charged for about 25 hours.
The light can last for 2 hours after fully charged on high light setting, 3.5-4 hours on low light setting.
The SMD will get progressively darker which means the battery is discharging. At this moment, please stop
using and charge the light. Please do not start charging until the SMD is entirely dark, as this will cause
damage to the battery electrode.
The emergency light should be used and charged frequently. Please charge it for about 8- 12 hours at least
every 3 months or the life time of battery will change. Charge the unit regularly for 8-12 hours to avoid
battery drain.